The Jalopy Journal
Thanks, fellas, I'll get with Rock Auto.
Very likely the rear main bearing seal. It can be replaced without pulling the engine/trans but it ain't fun. IMHO, if it isn't leaking a much and...
Is the Flywheel on a '98 Vortec 350 specific to the '98 year only? Further, is the harmonic balancer specific to the '98 Vortec 350? All help...
Yu dun gud!!!
IMHO, Roadsir has it right. Sway bars front and rear will make a hugh difference on a '40 (or any car!). Personally, I always use poly bushings....
FWIW We had a problem with the left exh manifold using a Saginaw 605 PS sector on my '41 Chevy with a 350. We found a cast iron manifold with an...
The heater and defroster motors on my '41 Chevy were stuck - dry bushings. Hadn't been run in over 6 years. I took 'em out of the heater and...
If thea 216 is in good shape, you can run 65 all day safely with the orig 4.11 gear. Run it 70 and it wont live very long. I'm told the 216 got...
FWIW Addco makes 'em front & rear. It may involve kits they make for '55-'57 T Birds. Give 'em a call. Putting poly bushings (frame mounts...
FWIW, like castirondude, I just add the "collector" to my regular policy (high liability, etc.) and use a "Face value" price for value. That way,...
IMHO, you should stop talking to people about your paperwork/title. Also stop worring about the tag which disappeared with the rusty floors. It is...
The guy with the '36 Roadster lives about 5 miles from me. John didn't tell you he's running a healthy flathead. He built the roadster himself and...
First, I know nothing and I should stay out of this but, here goes! I'm almost finished with putting a 350 Vortec in a '41 Chevy 2-door. I'll...
Well, guys, time for an update. We went with the Saginaw 605 (rebuilt) with a typical GM pump (rebuilt). Used a Chassis Engineering engine mount...
Separate names with a comma.