The Jalopy Journal
I've had this 4 door for about 23 years now. Used it to haul my drumset in the trunk and the whole band in the car. Now it's a weekend cruising...
I ended up relocating my lower bars to get them closer to the wheels and made a bracket to help strengthen the mounting point. They are now at the...
I did the same on my mustang tank going in my 40 Desoto . welded a steel brake like
I'll PM you
Here's an example
Keep in mind that your 40 ford frame has the X crossmember. When welding on the top links to the frame you need to keep in mind that if welding...
I have an old 25" Edmunds head. Swiss cheese like more than likely. Any value or fixable in that bad of condition?
Any updates on this project? Im curious to know where on the body you ended up mounting the top link brackets. If you boxed the frame before...
Thank You. It has an AOK racing, triple intake, split exhaust (original cast split) Langdons HEI distributor. Its a 265 engine out of a 1954...
It seems pretty hit or miss but in my experience it seems like many parts are interchangeable. Engines on the US made plymouths and dodge are 23"...
Its interesting that Im not too crazy about the grill compared to that of a 40-41 Plymouth, but Ive noticed many people have stated they like it....
Only 9 short years later
Nice! was the tail shaft exchanged for the forward mounted shifter? I was under the impression that only the older ones were forward mounted....
Meant to say on the earlier S10's with the forward shifter location
.. also the earlier year T5's used the mechanical speedo. So its easier to adapt to an older car. I picked up a 1985 NWC T5 that I'm planning...
Separate names with a comma.