Register now to get rid of these ads!

31Vicky with a hemi's Recent Activity

  1. 31Vicky with a hemi replied to the thread Technical Unsprung Weight Issues In Hot Rods: School Me.

    The same principals apply The difference is the rebound hit in your hot rod is contained and absorbed into your ass. [MEDIA]

    Jun 24, 2018 at 9:33 AM
  2. 31Vicky with a hemi replied to the thread Technical Only starts when letting off ignition.

    You gotta have that starter "I" terminal wired to the coil. It's a must have item as important as can be. if it's not there, 99.5%...

    Jun 24, 2018 at 9:04 AM
  3. 31Vicky with a hemi liked jedy's post in the thread Technical Only starts when letting off ignition.

    Ah thank you – So if I am reading this right, the bypass would be running a wire from the "I" terminal on the solenoid to the (+)...

    Jun 24, 2018 at 9:00 AM
  4. 31Vicky with a hemi replied to the thread Technical spring spreader price Ebay?.

    And for reversed eyes ? :p

    Jun 24, 2018 at 8:58 AM
  5. 31Vicky with a hemi replied to the thread Technical Unsprung Weight Issues In Hot Rods: School Me.

    It's a big issue! Post up some pics and something may pop out at us.

    Jun 23, 2018 at 7:58 PM
  6. 31Vicky with a hemi replied to the thread Projects 1959 Kingswood build.

    Looking good!! You are getting lot done over the past 5-6 months!

    Jun 23, 2018 at 8:10 AM
  7. 31Vicky with a hemi replied to the thread Technical sbc distributor install.

    An expert at distributor installation can get away with that more times than not and twice as many times on Sunday.

    Jun 23, 2018 at 5:50 AM
  8. 31Vicky with a hemi liked oldolds's post in the thread Technical Big ole '60 Buick technical question (help).

    You might not be able to get it to "lay frame". But you can lower it. Find 2 or 3 big women. If they can fit thru a hula-hoop they are...

    Jun 22, 2018 at 4:32 PM
  9. 31Vicky with a hemi replied to the thread Technical Big ole '60 Buick technical question (help).

    Lmfao My buddy had a big ole chubby girlfriend with a bad attitude, we nick named her "lowering kit"

    Jun 22, 2018 at 4:31 PM
  10. 31Vicky with a hemi replied to the thread Projects How many guys does it take to install a Model A body?.

    :D:D:eek::eek::p That's what she said!! 1:18 on the video I was watching this last night and my wife says "your phone is going off" I...

    Jun 22, 2018 at 8:38 AM
  11. 31Vicky with a hemi liked Bandit Billy's post in the thread Projects BRIAN MADE ME DO IT.

    In an earlier post I said I had installed a Holley regulator #12-842 to knock down the fuel pressure from the in tank 60 psi pump....

    upload_2018-6-21_12-58-15.png upload_2018-6-21_12-58-57.png upload_2018-6-21_12-59-44.png Jun 22, 2018 at 8:13 AM
  12. 31Vicky with a hemi liked Bandit Billy's post in the thread Projects BRIAN MADE ME DO IT.

    Simple answer, it is the pump that comes with the tank. When you buy a TanksInc tank they stick these Walbro electric pumps in them. I...

    Jun 22, 2018 at 8:12 AM
  13. 31Vicky with a hemi liked GordonC's post in the thread Linda Vaughn, Miss Hurst picture thread..

    I think she just goosed him! :eek:

    Jun 22, 2018 at 8:11 AM
  14. 31Vicky with a hemi attached a file to the thread Projects BRIAN MADE ME DO IT.

    I get the pump I pick from tanks. If you need more than 29 Gph ?? Optimal GPH = (Max. HP x BSFC) / 6 For BSFC I use .5 for your normal...

    image.png image.jpg IMG_0701.JPG Jun 22, 2018 at 5:51 AM
Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.