The Jalopy Journal
I've only got a few mins into this one but it's definitely different.
I haven't got to check the thing out thoroughly but this is what happens....
So I was googling hand held English wheels with the idea on making one, so I could work on the quarters of my car. They are a little lumpy and not...
I have a situation where I need to build an off set brake pedal, about 3".
It needs to have the ability be assembled on either side and come...
Some people just should not be allowed to do this stuff. Period.
so I get this 54 Chevy truck in here that's just impossible to drive....
I've been welding since the late 70's. Covered all the external basics.
I know how to run them but I'm not a fixer of machines, but maybe I can...
Ok so I know how it goes, want in one hand and ,,,,
But it would be nice if :
A Body filler that you can slick down and form and get it all...
I've been trying to do this with a part. I've met nothing but resistance.
This is 5 year old video and technology.
I really need it to happen,...
This is in my buddy's 62 nova with A 350.
We are changing from long water pump to short water pump, adding a shroud and decent fan.
I get the craziest stuff here.
This is an insane story of not my job
Maybe you've heard this before.
This is a story about four people named...
I have on word
We were having a hypothetical conversation about turning my trunk into a rumble seat to be able to haul the boys with us. It came up that it would...
This came up in another thread and it deserves its own.
it's easy, it's available but it's oh so God awful ugly.
I've never done one like this before ,,,nor seen one either.
In addition to normal side slosh baffles :
my common sense tells me I need a...
everything needs to work together back here. :)
Be sure to include pics or interpretations of things you mention
1 Need some sort of rear...
Anybody running one with plenty of use?
Arrived with dead battery .
Stated died on highway - no crank, no start.
I Charged the battery, hit the starter and got the thuuuuuuug sound....
just the way circumstances fell together, or fell apart, A lack of planning and there's nothing to do.
Well let's cut up that tube and make a...
First I'll say that I can not detect any movement in the kingpins or the wheel bearings.
Somebody please check me here before I go off.
such as :
P-clamps with a lager bolt hole.
Drilling them is a PITA
Wire Grommets for smaller holes (1/2") and heavier materials
Like 14 ga...
The first 2 pics are of pruned gmc case.
How is it mounted ?
Obvious how the non pruned case mounts.
So I get this SBC 350 powered car here. It belongs to an elderly gentleman who's been dicked around and passed around by a series of backyard...
Separate names with a comma.