The Jalopy Journal
[ATTACH] Drill the holes in the floor whey you want them then use a ratchet strap to mock up the length. The length of both half's depends on what...
Yep.. same here. I keept telling passengers not to rely on the doors to keep you in. Now got lap belts. [ATTACH]
I love mine. You can "feel" the torque. Helps diagnose when something is not going together right (binding threads etc)
Modern, non-led tail lights have plastic sockets and usually quite shallow. Check what's on your daily driver
Throwover latch. Used since the 30s on European cars. [ATTACH]
Battery problem.
Anything other than real glass is going to deteriorate optically in sunlight You need a shop fitter or builder that specialises in glass work....
Not sure about the Burtz head. It seems to be missing a waterway between cylinder 2 & 3 that's common in all other heads.
BAY15D 6v small globe Or LLB1072 Common on vintage motorcycles.
Pull the oil pressure sender and crank it on the starter. You will soon find out if it pumping oil.
In HAMB world we also have to deal with USS threads.
Too many variables without more information about what you have got right now, what you are willing to change and how low you want to go.
Alcohol is still used as an antifreeze in air brake systems, in fact we ran a dragster on it as it was the cheapest source of methanol at the...
Aircraft drip pans.
No.. the belt rail should be seperate. A lot of rods lose this feature completly but if keep it then it's seperate. It's also where the fabric of...
Separate names with a comma.
The Jalopy Journal