The Jalopy Journal
Anybody know where I can get a picture or drawing of the clips that hold the distributor in the block for a 52 Ford 215 inline 6. Ours are...
Yikes! Ok , so if I wanted to use a "period" tranny, what would bolt up to my '41 216. I know I will have to loose the torque tube.
OK Yup... :(
Ok, So found a '88 GMC S-15, 4WD, 5 speed. Am I getting closer? Is that a possibility before I get under it? The price is REALLY right!
Sorry, Nooooooooooo high performance here. A 216 in a '41 chevy suburban. Could prob use something with a rubber band. Will keep looking for one...
OK, That's what I thought . Knew I would get good info here! Thanks all
Just an Idea why I couldn't use the tranny from the 2000 S10. What would be the reason. Is it a bolt pattern question or something else...
I have a 41 Suburban and I would like to put in a T-5 trans and change the rear. I have a 2000 S-10 pickup but the info I have seen doesn't...
All Stude's were ahead of their time.
Replaced the coil and moved onto the fire wall. Seems to be working now. Got it up to temp and drove it around the driveway. Have to take it on a...
Hard to check. Only quits when hot. Then when I try to start it, it runs for a second and quits. Must have spark then. Then as soon as I turn it...
Had the '28 out (has a sb 350 in it) and it just quit. Wasn't getting fuel so I put a new fuel pump on it (electric)and ran fine - until it got...
Separate names with a comma.