The Jalopy Journal
308 Twin H Power runs Rebuilt Carbs New 800.00 clutch ,pressure plate and throw out bearing. New factory gas tank New master cylinder and brake...
Thank you Sent from my iPhone using The H.A.M.B. mobile app
For a Flathead V8 Sent from my iPhone using The H.A.M.B. mobile app
Does anyone know the specs on a Winfield SU-A1 cam? Or know of an equivalent with the same grind? Once again looking for some impressive knowledge...
There is a ball end connected to the frame and the clutch arm linkage might be worth keeping especially if you are going to use the pedals and...
Can you send a picture of the big transmission. In the F1s they only made the small 3 spd and a 4 speed which I am guessing that is what you have....
Yes the clutch arm is well worth keeping Sent from my iPhone using The H.A.M.B. mobile app
The 49 f1 case if it is a three speed is the best for building. It has the clearance and is more heavy duty at the bottom. Also should have a...
Your 32 case probably won’t accept the gears in a side shift themight possibly fit a 28 tooth gear or Zephyr gears but I am pretty confident that...
The f100 box Sent from my iPhone using The H.A.M.B. mobile app
Alchemy Would it work on a Model A with a little modification Sent from my iPhone using The H.A.M.B. mobile app
1 last question. What is the difference between a 53-55 box compared to a 48-52 box? Sent from my iPhone using The H.A.M.B. mobile app
Thank you ClarkH you saved my butt. I almost bought an f4 box. I owe you one Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.