The Jalopy Journal
What do you mean by setting it up level ? The top of the crossmember follows the top of the frame rail. You have to be at ride height to set your...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Here's how I did mine. Cut out the top, set at 7 degrees, add filler pieces, pie cut and add fillers, heat at...
Thats exactly what I did. Man was I surprised what things looked like when I got it apart and got the paint off. Those restorer's can hide a lot....
My roadster was made from an original 31.A friend of mine helped me with the body work, which was very time consuming. Then he built one with a...
[ATTACH] On my 34 pick up I mounted them in, because of fender and running board clearance. But not to far in so the exhaust could go through....
The F 1 box is a great choice for older fords. I have one in my 31 and I am putting one in my 34 p.u. As said above the steering shaft is below...
These races are not replaceable, you will need another hub. If the axle housing is worn or pitted you can have it turned down and a sleeve pressed...
Next time you park it hot pull the air cleaner and see if it sprays fuel when you move the throttle, no fuel, check the pump and filter, make sure...
Stock ford studs are swedged in. You need studs from Dorman that are serrated as Budget 36 said. You also have to drill the hole out and press the...
So that post was from 2017, he might not notice your question. But most commonly flange to flange is where the wheels bolt to the axles.
Wow, seeing those pictures I totally agree with everyone. For the sake of safety get rid of the whole front axle mess, and do some hard looking at...
A 1928-36 axle has spring perch centers at 36 1/2". The spring over axle 28-34 has 31 1/2" eye to eye centers. That combo will give you the 45...
Thanks for the good video, glad to see my roadster in there.
Dog bones and non progressive linkage on drivers side for 2x2 set up, throttle pedal on pass side. You have to synchronize your carbs to idle the...
I also am using the plug wires from hot heads on my Red Ram and the plug boots fit well. Also, I had a spark problem with the flathead in my...
Separate names with a comma.
The Jalopy Journal