53 Willys Aero Lark

The ole Lark. I had this thing for a few years. After admitting to myself that I would never probably fix it up I sold it.

Little better shot of the crappy rear repair job.

PhilJohnson

53 Willys Aero Lark

Little better shot of the crappy rear repair job.

260

30 Jan 2010

Another view of what is left of the underbody.

PhilJohnson

53 Willys Aero Lark

Another view of what is left of the underbody.

246

30 Jan 2010

Severe rust on the rear frame rail. Yet again another half-assed attempted at repair. A piece of scrap steel was used to attach the rear spring mount. Since then the rest of the frame rail rotted away leaving nothing left for the scrap steel to be attached to.

PhilJohnson

53 Willys Aero Lark

Severe rust on the rear frame rail. Yet again another half-assed attempted at repair. A piece of scrap steel was used to attach the rear spring mount. Since then the rest of the frame rail rotted away leaving nothing left for the scrap steel to be attached to.

784

30 Jan 2010

In this picture you can see what the crossmember originally bolted to. There is nothing there any more to bolt to.

PhilJohnson

53 Willys Aero Lark

In this picture you can see what the crossmember originally bolted to. There is nothing there any more to bolt to.

306

30 Jan 2010

This is what I wrapped the chain around on the inside of the car. It is a piece of 2x4 square tubing.

PhilJohnson

53 Willys Aero Lark

This is what I wrapped the chain around on the inside of the car. It is a piece of 2x4 square tubing.

282

30 Jan 2010

Someone's idea of a sturdy fix. The weld had broken in the front holding up the angle steel. I wound up chaining the angle steel back up tight to the body just so I could move the car around

PhilJohnson

53 Willys Aero Lark

Someone's idea of a sturdy fix. The weld had broken in the front holding up the angle steel. I wound up chaining the angle steel back up tight to the body just so I could move the car around

288

30 Jan 2010

Some of the severe rust issues I am dealing with on this car. You can see that sturdy piece of wood that makes up the rocker panel in this picture.

PhilJohnson

53 Willys Aero Lark

Some of the severe rust issues I am dealing with on this car. You can see that sturdy piece of wood that makes up the rocker panel in this picture.

282

30 Jan 2010

Wasn't quite ready for all this snow business.

PhilJohnson

53 Willys Aero Lark

Wasn't quite ready for all this snow business.

259

09 Dec 2009

PhilJohnson

53 Willys Aero Lark

Darn blizzards!

299

09 Dec 2009

PhilJohnson, Oct 14, 2009

Page 1 of 3

Album Comments

There are no comments to display.

Show Ignored Content

Top

Log in or Sign up

53 Willys Aero Lark

PhilJohnson

Little better shot of the crappy rear repair job.

PhilJohnson

Another view of what is left of the underbody.

PhilJohnson

Severe rust on the rear frame rail. Yet again another half-assed attempted at repair. A piece of scrap steel was used to attach the rear spring mount. Since then the rest of the frame rail rotted away leaving nothing left for the scrap steel to be attached to.

PhilJohnson

In this picture you can see what the crossmember originally bolted to. There is nothing there any more to bolt to.

PhilJohnson

This is what I wrapped the chain around on the inside of the car. It is a piece of 2x4 square tubing.

PhilJohnson

Someone's idea of a sturdy fix. The weld had broken in the front holding up the angle steel. I wound up chaining the angle steel back up tight to the body just so I could move the car around

PhilJohnson

Some of the severe rust issues I am dealing with on this car. You can see that sturdy piece of wood that makes up the rocker panel in this picture.

PhilJohnson

Wasn't quite ready for all this snow business.

PhilJohnson

Darn blizzards!

Can View Media:

Can Add Media:

Archive

Atomic Industry

Support

Subscribe

53 Willys Aero Lark

Sort By...

Type Filters

Useful Searches

Archive

Atomic Industry

Support

Subscribe