Site Links Affiliated by SOVRN.
Register now to get rid of these ads!

28 Model A build

A road trip a while back had me collect a nice selection of parts and now, while I have some spare time I have been working on this project. It's going to be a 28 Tudor and I'll keep posting pictur

Sort By: Comments

Sort By...

Filters

Type Filters

If your going to have a project, you need help. This is my Grandson and he's given me the OK to install the rebuilt spindles if he can help.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

If your going to have a project, you need help. This is my Grandson and he's given me the OK to install the rebuilt spindles if he can help.

1
328
0
22 Mar 2010
Cleaned up the bearing surfaces and axles. Removed the stock '42 spring to install a Model A rear spring. This will be mounted in place of the stock '42 spring, to the rear and down to lower the height of the car.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

Cleaned up the bearing surfaces and axles. Removed the stock '42 spring to install a Model A rear spring. This will be mounted in place of the stock '42 spring, to the rear and down to lower the height of the car.

0
447
0
22 Mar 2010
OK, on to the rear axle.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

OK, on to the rear axle.

0
434
0
22 Mar 2010
Done and in the sun. New King pins & bushings, wheel bearings & seals, New dust caps, new tie rod ends so it should be a nice tight setup and stop well with the F1 brakes.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

Done and in the sun. New King pins & bushings, wheel bearings & seals, New dust caps, new tie rod ends so it should be a nice tight setup and stop well with the F1 brakes.

0
507
0
22 Mar 2010
OK, painted and ready for final assembly.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

OK, painted and ready for final assembly.

0
470
0
22 Mar 2010
When the grand son is gone here is my other helper.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

When the grand son is gone here is my other helper.

0
279
0
22 Mar 2010
35 wires look good with the wide whites
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

35 wires look good with the wide whites

0
321
0
22 Mar 2010
Everything fits well but the old sway bar mount comes close to the hairpin so they will have to go.
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

Everything fits well but the old sway bar mount comes close to the hairpin so they will have to go.

0
290
0
22 Mar 2010
Axle is mocked up and getting a last check over
Cliff Ramsdell

Cliff Ramsdell

28 Model A build

Axle is mocked up and getting a last check over

0
340
0
22 Mar 2010
Cliff Ramsdell, Mar 22, 2010
Page 1 of 3
    There are no comments to display.
Register now to get rid of these ads!
Top

Archive

Support

Support The Jalopy Journal - Contact Us - Log In

Subscribe

By Email - RSS
-
Our Affiliate Link Policy

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.