Very cool start. I moved my springs inside of frame by cutting front spring perchs off even with frame and swaping sides weld back on. and cut and weld in 1 inch tube for rear shackel mount was not hard at all my housing cut to 52 inchs wide 15x10 4 3/4 back space 315 tire very close fit out side a 275x15 would be fine good luck. I noched my frame to lower also. 8 inch wheels with 4in back work very well with 235/60 tire. have fun Rich
I see you guys talked about moving the springs in word. I need to look at that as I was thinking of using a employer 8.8 rear. What rears do people use?
The Jalopy Journal