Hot Rods fresh '28 needs header header baffles....any one have recommendations?

I need to quite down headers on this sedan. I love the look of the pipes and don't want to add an under car exhaust. Has anyone had a good or bad experience with this product?

http://www.lakeheaders.com/BAFFLES.html

Anyone have another product or a homemade fix they would recommend?

Many thanks fellas!






Posted using the Full Custom H.A.M.B. App!

 

just found this thread - looks like Matt @ Lake Headers is the way to go...

http://www.jalopyjournal.com/forum/showthread.php?t=615321

 

I built some using motorcycle baffles. Fairly easy to do and work good.

 

fellow hamber, Matt @ Lake Headers, custom built these baffles w/ turnouts and they fit beautifully & created a very nice rumble.




Posted using the Full Custom H.A.M.B. App!

 

Same thing for less dough;

http://www.sandparts.com/servlet/the-5752/sand-rail-dune-mini/DetailThese are much less dough;

http://www.ebay.com/itm/VW-BUG-BUS-BUGGY-GHIA-STINGER-BAFFLE-EMPI-3780-1-/161103396113

http://www.jbugs.com/product/3780-1.html?Category_Code=empi-vw-stingers-baffles

 

I have a set of Matts Lake headers with baffles on my A Sedan also and I love them.
If you wrap ceramic or fiberglass mat around the baffles they tone down even more.

 

Very cool sedan...

 

Thanks if your talking to me.

 

thanks djust - I am going to try wrapping them and see if I can tone it down more. where do you get the fiberglass - is it anything particular or will insulation fiberglass work? Thanks!

 

I got mine from a fellow hamber that is in the industry somehow and he sent me some ceramic fiber that I used.
But I hear that most motorcycle shops sell fiberglass made for wrapping around baffles.

 

Got a video of it running? Would love to hear how it sounds. I was planing on ordering a lake pipe kit from that guy for my Tudor. By the way nice car!!!


Posted using the Full Custom H.A.M.B. App!

 

The guy at Gear Drive is who I'd call. He's on the hamb and makes direct fit for those cones... they are drive shaft tubes, he will no what you need.

Good to see her finally running. I rebuilt that car couple years ago for local guy. Please contact me with any questions... Build photos are on my website jokerrfab.com.

Posted using the Full Custom H.A.M.B. App!