Any one tried this Cam from Mac's? (Banger)

so i want to get some more power out of my flat4 and found this

http://macsautoparts.com/model-a-ford-camshaft-reground-touring-style-grind-3-bearing-style-a6250t/camid/MDA/cp/JS0R3CHL1109632/

but i would like it if somone have some input on the cam, how does it hold up? is it ok for the street? i wil add a 6:1 head aswell

Thx

 

Kjell
That is a very mild cam. Not worth the money.
Check on the Fordbarn forum and ask Jim Brierley

 

Thanks for the info!!! Been looking for a hot cam for my A powered t coupe!!

 

thx!

 

Whoops didnt read 4 cylinder, my bad...

http://www.fordgarage.com/pages/stipecamshaftspecs.htm

 

that is a very mild cam, but if you have a good running engine just install a downdraft carb and a high compression head, you will be pleased with the results. [email protected]

 

i used that cam in my a, also 6to1 head, red headers, weber downdraft, into dual exhaust. livened it up quite a bit. fun little roadster that way.

 

i have a downdraft, planing a 6:1 head and a cam but no rush we will se