I've been considering installing a battery cut off switch, and I see you can get a manual reset breaker, that would to that job, as well being a circuit breaker. What I don't know is what size breaker to use. Anyone know how to figure this out?
Add the amp draw of everything in the car plus maybe 10 percent more. If I was doing it I would use a temporary fuse. You could change the rating to zero in on the correct size.
Depends on what engine you're spinning, this should work for a 6 cylinder. I'd get a 250 amp for a big block V8. Stay away from the ultra cheap Chinese crap unless you like to walk alot. http://www.amazon.com/Bussmann-Hi-A...0?s=automotive&ie=UTF8&qid=1361423526&sr=1-10