Its already close to the four link. When the suspension bottoms out there is an inch of clearance between the two.
well last night I get the bed welded up and have all the bed bolts drilled and are ready to be assembled. The bed just needs a coat of paint to hold me out until I tear the truck down to clean up the entire body.
I had a radiator shop make me a radiator to fit my grill shell for around $200. put the outlets and filler cap where I wanted them. It's 4 core, brass radiator
Been a while since I have posted on this thread. But last month I pulled the drivetrain out of the truck and had the trans rebuilt and completely went through the motor. The motor is going to dynomotive on tue to get broken in and tuned. Can't wait to get it back on the road. Picked up a tri power setup for it also Posted from the TJJ App for iPhone & iPad
Here are some side profiles of the truck before the drivetrain was pulled Posted from the TJJ App for iPhone & iPad