Hey fellas. I have a 440 Chrysler engine that I'm wanting to put in my 57. Is there a mount that will work for this???
i love the perversity of the idea of sacrilege to a Chevy icon ...but yeah, you are flyin' solo there. you might look at this kit http://www.srpmstreetrods.com/srpm/...0-440-ff80818121faeced01225ad67e0661d0-p.html
Cool idea man! Yep those mounts will have to be home made. Make sure you have the metal mounts the that bolt to the block that use the rectangular rubber pads and that way you can fab from the rubber to the Chevy crossmber.
My buddy put a 440 in a 75 Nova, he used the brackets and mount pads from a Dodge Ram Charger (75 ) and fabricated the brackets to the frame. We had a lot of fun with it. He even took 2 sets of Chevy 400 emblems and redid them to say 440. Lee
I seem to remember an article back in the 80's where this guy was bracket racing a Vega with a 440 in it. He was using seat belts as travel limiters on his rear suspension.
Cool idea. Is that what you had or just want to be differant? You will probably fill bad when that guy with the big block chevy in his blows you doors off.
This also could go the other way You will probably fill good when that guy with the big block chevy in his 57 Chevy gets his doors blown off by your 57 with the Chrysler 440. Just sayin
I've got a '57 Chevy wagon, and a '56 150 sedan... This is a VERY cool idea! Definitely put the 440 in it. As others have said, you're on your own for front engine mounts. There are plenty of trans cross member kits available for '55-'57 Chevys. You'll have to modify and tweak it a bit for the Mopar trans, but that's okay. What are you going to run for an intake? -Brad
I have a 55 chevy and a hemi plymouth project, so I have interest in both sides of this. Good motor, good car. Good combo?? The car doesn't care. I don't care. But don't expect much acceptance at thee local cruise nite.
Cool idea, make sure to consider front x-member sump clearance before you dive in. Good luck. pics as you progress please
Yea, Im sure that the guys with the 32 fords with 350's in them will really appreciate the Mopar in the tri-5. F 'em
There was a Hot Rod magazine feature car in the late 70s-early 80s, 55 Chevy with a B/RB Chrysler. Pretty sure it was a Gray Baskerville article, IIRC the swap was surprisingly painless.
I knew that was going to stir you guys up. Like was said check the oil pan sump location. I have a 66 belvedere I am going to clone into a 67 GTX and was thinking of putting a big block chevy in it. I am sure it all boil down to what I have running at that time hell could be a 430 buick who knows. I am not brand specific I like most all of them if thay sound good and will burn a tire.
Cool!!! should generate some conversations. Remember a guy having a 57 chevy with a 406 ford tri power.
Please don't bastardize that car. It needs a 350 crate motor. Gotta keep a Chevy in your Chevy. Just kidding. I love the idea. Good luck.
Ok...this is hilarious. I kept reading Umakee...Umakee...WTF and then AH-HA. Never seen this comment before!
I remember a dirt track 55 chevy with a 427 ford in it and the ford scrip painted on the fenders. Someone put the fenders on another car and repainted them and the ford kept bleeding through.
Big block Mopars fit in everything. The thought has crossed my mind before of buying a chevy and putting a mopar in it, just like an art piece to express myself.