Never owned one of these and probably never will but I have seen pictures of these "Quick change" style mr gasket aluminum rear end covers for 12 bolt chevy and have always wondered what is the point of them. Are they just basically to give the rear a different look with no function at all except for maybe extra fluid capacity? I've searched all over the internet and can't find any info on them.
wow that is ugly! I think I remember seeing those at the local speed shop back in the late seventies or eighties. Or I might be dreaming. Sur is hidius though.
There are some fairly decent LOOKING QC-style rear end covers. That one is NOT on the list. Appears to have been designed by someone that had only seen a true QC as it headed down the road at a good clip. That pseudo-case is way too boxy and there's insufficient detail to do anything but make folks point and laugh.
Then back to the first obvious question...WHY? Like nobody is going to figure out it's a fake with another set of bolts right around the "cover"...
!!! Another one of the reasons I'm still trying to forget "the '70's"!!!! Mart3406 ------------------- P.S. I think you may have just solved the mystery of what was in that box that the late, poor 'old 'Phil Harris found "a floating in the bay"!!! You are DOOMED!!! <iframe width="420" height="315" src="http://www.youtube.com/embed/h2H6qC23RPY" frameborder="0" allowfullscreen></iframe> =============
Looks like something you'd find on a 1970 Malibu. Sorry. I couldn't resist. Hahaha. Actually, it's not just a poor execution. The whole concept is terrible. Posted from the TJJ App for iPhone & iPad
I used to have a speed shop back in the early 80's , this was from a time when Mr.G and others were running a bunch of fake stuff,fake bug catcher scoop,rear end covers, pretend bolt in roll bars etc.Just trying something different.Those were the days that emissions started to take over heavily and show not go was becoming more popular! Sad days indeed.
Good call, now that you have reminded me (us?) of those so-called "final days" of the muscle car era, I can recall all that silly crap. dj
Thanks for all the replies and laughs. I agree it is pretty hideous looking. Just was wondering about them as like I said, you can't find any info about them.
Looks like a mint in the box rare NOS vintage part to me , to bad its worth more in scrap than what you could sell it for. I recall seeing only one back in the day on a car which I don't remember but the owner had fake sideburns and was wearing plad bell bottom pants and a pastel blue shirt with black mondo shoes with big heels. He also had a rainbow decal in the rear window!
Put a pad inside it, rivet on some straps, and wear it as a helmet when you cruise you 'tangmobile down the strip. I'll give you $5 for it, plus shipping, just because I would make it into a helmet to wear.
I saw one on a car back in the late 70's/early 80's and yes, guys were laughing at it. Kinda like those fake "zoomie" pipes strapped to sides of a 4 door car. Very funny indeed.
Reminds me of a guy I know. He used to wire a chrome Dana 60 rear cover plate over the back of the 8-3/4 rear in his Mopar.
Well, we can easily fix the details here; just drill & tap a few holes for some bolts around the edge. That leaves only the fundamental error of taste, utter lack of knowledge of both proportion and function of what was being imitated, and some shoddy execution, which can be easily addressed with only a big hammer.
I used to think they were too corny when they first came out. Now, I'm not sure. A finned aluminum cover and extra oil capacity can help cool down the differential. Overheating can be a problem when towing a trailer .
I made something myself today that looked better than that, but I flushed it. At least I didnt post pics of my turd.
Only thing thats good for is to be melted down and used for some good part you make at home..............3.50 a lb scrap price
On the plus side...As Rusty O tool said in a previous post that you could have extra oil capicty and the fins would cool the oil. Many many years I ran the stock looking finned alum 10 and 12 cover on several circle track cars just for what I thought was the cooling factor.
After reading the various posts on this thread I happened to notice a near new Nissan ute (that's pickup truck for the US folk) with a finned alloy cover on the back of the diff housing. I can just see a change in the marketing angle and the prices will now sky rocket!
I have built real quick changes for about $250. It's not easy and you can't be in a hurry. But if you scrounge and do everything yourself you can have the real deal pretty cheap. Kind of like fake titties, they just don't sound the same!