Register now to get rid of these ads!

Lets see some some Slick 60s F100s!

Discussion in 'The Hokey Ass Message Board' started by 65fordguy, Aug 18, 2008.

  1. lrs30
    Joined: Jan 30, 2007
    Posts: 2,214

    lrs30
    Member
    from Kentucky

    1269.jpg

    Here is mine down at the Woodford Reserve Distillery while we cruised the Burbon Trail last October.
     
    droppedstepside likes this.
  2. lrs30
    Joined: Jan 30, 2007
    Posts: 2,214

    lrs30
    Member
    from Kentucky

    1378.jpg

    1355.jpg

    A few more from the Bourbon trail.. :D

    I need to lower the ass-end a bit, but don't want it to bottom out on the bed floor, and I am not gonna cut a hole for clearance. I maytry to flip it and see what I end up with. Anybody had anyluck flipping the rear with out hitting the bed floor?
     
    droppedstepside likes this.
  3. throttled
    Joined: Jul 31, 2012
    Posts: 1

    throttled
    Member

    Hi son,
    Bob spotted my old truck on here and told me so I thought I'd say Hi. Hope you and the family are all well, I love you and think about you every day, Mom
     
  4. Used Up Junk
    Joined: Nov 12, 2008
    Posts: 674

    Used Up Junk
    Member
    from Merced, CA

    lrs30, my truck is flipped and C-notched and I hit the bed floor constantly and I'm only running a 1" drop block. The plan is to raise my whole bed floor as soon as I find a good floor panel.
     
  5. BigScott666
    Joined: Aug 31, 2008
    Posts: 184

    BigScott666
    Member
    from East Coast

    what is the replacement seat for my 63....looking to relocate the fuel tank to the rear.....and get some room in the cab. Being 6'3" it's TIGHT with the stock seat!!!

    And...in your best opinion....what's the best front clip to go with????? Crown Vic?
     
  6. ryno
    Joined: Oct 6, 2005
    Posts: 3,470

    ryno
    Member

    Just rolled back from line x
    Going to button up the trim tomorrow
    Raised bed floor,all air shit is under the front hump
    Check out the build thread,lots of pics there
     

    Attached Files:

    droppedstepside likes this.
  7. ryno
    Joined: Oct 6, 2005
    Posts: 3,470

    ryno
    Member

  8. chaddilac
    Joined: Mar 21, 2006
    Posts: 14,021

    chaddilac
    Member

    Looks good ryno!!! Hard to believe that used to set in my back yard!! :D
     
  9. ryno
    Joined: Oct 6, 2005
    Posts: 3,470

    ryno
    Member

    Thanks man
    About 1 yr ago,you could of done it!
     
  10. Randzz75
    Joined: Jul 8, 2012
    Posts: 307

    Randzz75
    Member

    Ya I think thats the way im going to go, but cant do the stake pocket thing because I shaved the holes:D
     
  11. Randzz75
    Joined: Jul 8, 2012
    Posts: 307

    Randzz75
    Member

    Im also 6'3" and I also took the gas tank out of the cab. I took the stock tracks and welded an extension on the front and redrilled the back hole and it gained me about 4" from the original seat location. I also cut almost 6" out of the steering column moving it in closer to the dash, Tons of room now!!:D
     
  12. Randzz75
    Joined: Jul 8, 2012
    Posts: 307

    Randzz75
    Member

    Thats a bad ass uni, im going to def check that build thread out!!!
     
  13. You can run bronco buckets in it or possibly Tbird buckets and push them against the back of the cab where the fuel tank used to be. Best front clip would be Dodge Dakota from Industrial Chassis out of AZ. He made the setup very easy to set in place and weld up in a day and the geometry and the way it's built is the best for our trucks and strong as hell IMO. Crown Vic is pretty easy but more work involved as far as power steering on them go, brackets being built, etc and the offset for the wheels are horrible because it's a wide front end compared to the original width.
    Good luck on the build!
     
  14. 4psi
    Joined: Nov 30, 2011
    Posts: 298

    4psi
    Member

    Kraig's Truck from The Black Widow garage in Wellington,KS.[​IMG]
     
  15. BigScott666
    Joined: Aug 31, 2008
    Posts: 184

    BigScott666
    Member
    from East Coast

    Thanks man...I appreciate the reply/info
     
  16. No problem 36Chevrolet... BTW, is that your 5 window truck in your avatar? If so, I like it! I have been wanting a 47-54 Chevy 5 window for years and have had my eye open for one for the past year now. I'd love one on an S10 chassis and use it as a shop truck to drive the hell out of.
     
  17. A Rodder
    Joined: Jul 13, 2008
    Posts: 2,474

    A Rodder
    Member

    Here is a few I have had.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    This Crew Cab was a friends, it now is overseas.
    [​IMG]

    [​IMG]
     
  18. Always liked that red one Joe
     
  19. A Rodder
    Joined: Jul 13, 2008
    Posts: 2,474

    A Rodder
    Member

    Glen has it back now, if you hadn't heard.
     
  20. Wow really? lol
     
  21. Mine on it's first drive

    [​IMG]
     
    droppedstepside likes this.
  22. A Rodder
    Joined: Jul 13, 2008
    Posts: 2,474

    A Rodder
    Member

    ^^^^^^^^^^^^ I Like That^^^^^^^^^^^
     
  23. Thanks mate


    Sent from my iPhone using TJJ
     
  24. SchlottyD
    Joined: Feb 4, 2007
    Posts: 740

    SchlottyD
    Member

    Binga, that stance is perfect for these trucks. Bigs and littles also help.
     
  25. Thanks for the comment.
     
  26. ski 66
    Joined: Jun 7, 2012
    Posts: 3

    ski 66
    Member
    from Omaha NE

    My 66
     

    Attached Files:

    droppedstepside likes this.
  27. salf100
    Joined: Oct 13, 2009
    Posts: 431

    salf100
    Member

    The bed on and new hood. also shaved the rain channels above the doors only.
    ImageUploadedByTJJ1347212573.688080.jpg


    Posted from the TJJ App for iPhone & iPad
     
    droppedstepside likes this.
  28. I recently picked up a 62 Unibody. Where are you guys getting repro parts for these? Door seals, window rubber and felts ... etc etc.

    Thanks!
     
  29. choptvan
    Joined: Mar 19, 2010
    Posts: 2,161

    choptvan
    Member

    LMC has good stuff. So does National Parts Depot (NPD).
     
  30. 65fordguy
    Joined: Jul 4, 2008
    Posts: 1,451

    65fordguy

    BTT! ... took the truck for a drive to enjoy the nice Arkansas weather.
     

    Attached Files:

    droppedstepside likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.