'51 Ford Turn Signal Wiring Diagrams Here

I don't know if this is of interest or use to anyone, but I have scanned the assembly/wiring diagrams that came with a '51 Ford turn signal assembly. I tried to put them on the technical archive forum, but I apparently don't have those privileges yet. If someone wants to move them for me, that's okay. Anyway, the drawings are here:

<O</Ohttp://www.mcload.com/1951 Ford Turn Signal View A.jpg<O</O
http://www.mcload.com/1951 Ford Turn Signal View B.jpg<O</O
http://www.mcload.com/1951 Ford Turn Signal View C.jpg<O</O

Hope someone can use them!

By the way, when the picture opens, right click to either "save picture as" or "print". The first diagram is a "portrait" print, the other two are "landscape" prints.

 

Holy shit you rock. I love it when other people make things easier for me. Just about to start wiring mine up and everything else is a cinch, cept for that. Now, I'm covered.

 

Thanks. I'm planning on using a '51 column in my '29 roadster project, and I want the signals to work. Any ideas about how to make the horn work? The original horn wire ran down through the center of the steering shaft, but that won't work for me. I'd appreciate any help in that regard from anyone here on the hamb-- please pm me with your thoughts. Thanks. Jack Luther.

 

Wow Dude ya got ESP or sumthin. Just got turn a signal switch and was gonna look for instructions tonight,, Guess I'll just have to look for porn instead!!

Thanks a bunch!

 

Jack: I had to go to a solid steering shaft with u-joints, so I can't use the center hole wire either. If I'm not mistaken, that wire is simply a ground, so that when the horn button is pushed, it connects the circuit making the horns blow. However, I don't yet know if Ford used a horn relay or not.

So I was planning to just include a ground wire (from horn button) in the side bundle of wires that runs down from the turn signal switch (and is covered by a small piece of channel). This way it won't show, and can be connected to whatever wire is needed to make the horns work. Just make sure this wire makes good contact with the horn button somehow. I don't think the horn wiring is addressed in these schematics, but I could be wrong.

 

That should work great. Ford did have a horn relay here. Mine is still sitting on the firewall. The wire is providing a ground and any common 12V relay will work with it. Thanks again.

 

does anyone have a copy of the links in the original post that no longer work, It would make my life alot easier thanks

 

Me too. can't get the link to work. I'm trying to wire up the turn signals and brake lights on my car to register it.

thanks,
Jimmy

 

Jimmy and Lonewolf: Send me your e-mail address and I'll send you the wiring diagrams. Sorry the links no longer work.

Patrick

 

Patrick, could you please send me turn signal diagram on 51 ford ? I try the links nothing came up. Thanks Pat email: [email protected]

 

Thanks I got to figure out the wiring for my Willys and that will help a ton.

 

After all. Just picked up a 51 ford or custom. Could i get a copy of those files. I'd like to wire up some turn signals on the ole gal.

[email protected]

Thanks

 

Man perfect timing, wiring my 51 right now and was just getting ready to do the original turn signal wiring..........Thanks a million!

 

Me too.......... [email protected]
thanks again

 

If u still have the diagrams can i please get a copy..tryin to wire my car now..thanks again...email is [email protected]... thanks again for your help

 

I need turn signal diagram for 1951 ford custom. Help greatly appreciated [email protected]