Pay it foward = free parts for HAMB members

I'll get involved.

I have a 55 Plymouth 259 pressure plate and clutch (original usable condition) with a new but slightly dented throw out bearing ... you pay shipping.










Could use a 35 Ford truck driver side windshield garnish molding, same truck - DS window regulator, and a 3x2 set up for Plymouth 259 poly

EDIT: This is just a wish list .. the above is free, you do not need to have anything for me to get the clutch parts. #payitforward

 

Got a spare deuce 3W body sitting around?


iPhone - TJJ app

 

....what's a SPARE deuce look like

 

Here is what I'm looking for if anyone has these reflectors

 

I could use a few things, all 55-56 Pontiac:
Battery to fender brackets
Steering wheel horn ring
Driver's side front window glass (4dr sedan)

I can offer up:
Rear flat glass (tailgate) for '56 Buick Special wagon (hope I still have it!)
Tailgate interior stainless for '56 Buick Special
GM alternator for alternator conversion
Rear fender for '72 Triumph 650 motorcycle ( hope OT is Ok )
Mid-50's GM vacuum wiper motors
Johnny

 

what cha got for tail lights ???

 

Any useable hairpin radius rods out there? I have an unsplit wishbone and front axle (36 truck) I dont want to use, I would rather have more adjustments with the hairpins.

Im also looking for a set of narrow 16 inch 5 on 4.5" internal clip hubcap wheels that can accept tubeless tires.

Anyone need International parts- I have way more than I can list!
Thanks!

 

I could use the brake system off of a '33-'36 Chevrolet Master (6 lug) !

 

When I finish the '28 I will post some stuff.

 

looking for 2 chrome steelies 15 x 7 5 on 5 1/2 ford model a

 

carbs are spoken for. thanks voh. still looking for center bar for 53 chevy car

 

I need '61 Bel Air Trim for 2 door- doors and quarters.

 

Here is what I need. 1946/48 Ford Hood Hook

I will post other items I have for free.
Bob,

 

Here is what I have for free. Should be 3 parts. If not they 2 Chevy balancers for 265/ 283/ 327. If interested semd me a PM to [email protected]

Bob,

 

I'm in need of a '49 to '51 Lincoln left hand head light surround.
Anyone?

If anyone wants old New Zealand Hot Rod mags let me know.
You just pay shipping and I'll supply the mag free.

 

I have the rear axle out of a 1950 f-1 - If you need it come get it.

 

slightly side-stepping for just a moment: when i replaced the f-1 rear in clarence with an 8" ford someone wanted the old rear. i don't remember exactly what parts he wanted, but it seems like it was the axles & brakes to use in a banjo rear. anyone having any info on that adaptation deal please start a tech thread about it. that might be something that would be of interest to several folks.

now back to your regularly scheduled programming...

 

ok recieved 2 wheel cylinders from 48fordnut
offering up a complete 36 ford front suspension-wide 5 drums,spring and unsplit bones -pick up only in hatboro-pm me

 

HRS, glad you got the parts.

 

1939 plymouth p8 inner fenders and heater box, back seat (upholstery is shot)
1940 ford gas tank, been modified with a newer ? gas gauge float and sensor.
1950 ford camshaft.
1974 gmc jimmy manual steering gear box

wouldnt mind finding some decklid hinges for my 39 plym, bad condition or not.

Located in tacoma washington, pm if ya want them.

 

I got a freebie Lincoln coupe door top off hvychvy.
Thanks a million man.

 

I got a kick ass door handle and rear view mirror from Scott,Thanks dude you rock///
I have 2 f1 door handles (outside) and an82 chevy 4 speed trans..
thanks guys

 

I got something that I have been taking to swap meet for so long that I am afraid that the box is going to disentegrate. NOS Grant standard piston rings for a 352 FE. Free to anyone that wants them and I'll even pay the freight to the US. If nothing else its a cool looking box.

 

Free to good home. I have a 5 gal floor mounted plastic fuel cell (Jaz type). Just send $15 for shipping any where in the USA.

 

Just a thought...
When i was active on a classic Mini site, we had a box of goodies that travelled from member to member. You could remove any item you wanted but had to replace it with a good usable part. I got some extremely cool stuff this way and passed along some of my overstocked parts. I know this may be harder on a group where so many different types of car are represented, but does anyone see an angle here?

 

PM sent on the fuel cell.

OJ

 

any one need a 53 chevy car bellhousing? 216 or 235 should fit many years.early style bolt pattern. small center hole.

 

I just might be able to hook you up not show but good cond PM me

 

the 74 chevy book is pretty musty smelling but still a great garage book. u pay the freight ill ship it & please send back whatever the freight was. may take a few days to get to the post office.
both small block chevy books are exactly the same.

to enlarge photo left click on it then left click again to enlarge it

can use interior door opening handles for 40 ford p/u used would be great