yes i have room need a new toliet seat and i need 280 headlight buckets for the toliet paper roll lol
280 Z? i don't know where you can find them. I have some 240 Zs but they are in bad shape and would be painful to use. Gonna be around today. Back to topic, Dustin is your Merc running yet?
yes im going right now to pick up aframes for truck do you see the other post on here finally been posting some
OH!!! Dustin, the car looks fanfreakintastic. Those up close shots with glass, really shows the good look on that chop.
Here's a couple of pics.Middle pic,with no caps is after 2'' dropped uprights install.Also has aerostar coils.And my helpers!
sure do love them mercury's and nice work too. I like them low keep up the good work I will be following this.
Looks great. I've got a pit crew, 4 and 6, they will be riding with me in 2012 once I put in seat belts.
Ya gotta come out of the shop. Ill need help in about two weeks with something. Come here and play for a change.lol Beers cold. Jack is colder.lol Call me.
what was your ground clearance with just the aerostar springs? I got aerostar springs for my 51 and was thinking of doing the 1" spacers under the coil plate on the lower control arm to get it real low, also have the weight of a caddy 472 to help drop it down too
Tried that with mine(springs and spacers)I had to go back stock on the plates.I only had about 2'' of clearance between the lower control arm,and crossmember(if you can get the springs to stay in,while you let it down).I drilled out all those rivets for nothingended up putting the aerostar springs with 2'' dropped uprights.
very nice shop.hope mine comes out as good as this merc.mine has to be reshop.hopefully next week I should be picking up my doner and following your footsteps.good luck
I'm. Not shure, I picked Mine up used.I believe they are around 500 bucks,but really not shure. Thanks, I appreciate it.be shure to post some progress pics!