Slant Six DODGE--BRING IT!

This is my 1970 Swinger

 

Wow that turbo six Simca was awesome.
Here is my meager video http://www.dropshots.com/Dolmetsch#date/2008-10-14/08:01:07
So that iSimca is the fastest /6 with a Turbo .Who is the fastest /6 normally aspirated preferably with carbs but Inj is ok too.
Don

 

Here is my brother's & mine 61 Dodge Lancer with a Injected Slant 6 (Pictures are from 1971)

 

My poor 'lil '64 slant runs good but needs some love

 

Here's our other slanted ride. 63 Valiant.

 

A few pulled from the net.

 

here is mine.

 

old post, i know. But looking for a multi-carb intake for my 225 slant six. 1960 Dart.

 

great read, I knew about the exhaust already as I had an aspen, i see a alot of individual pipes in the pictures, he's not kidding, run 1-2-3 together on one set of headers, and 4-5-6 on another and tie then back together after about 6-8 feet, i did this myself on one and it makes a huge difference, it's all in the scavenging

 

A couple of pix's of the work of the "Senile Ole Men" for thier SDRA car.

 

I'm really interested in this cross flow head conversion. Anyone know more? Thanx, Gary

 

Here's the slant in my HAMB-style dragster. Stock except for the intake and exhaust but getting more horsepower this winter.

gnichols, one of the guys on the slant six site just recieved a head from Argentina. I know nothing about it, but you could go to the site and investage further.

 

Neat motor.. Is this the site you speak of? Gary
http://www.slantsix.org

 

need one of those inline 2 1bbl manifolds and some headers for mine. Anyone have a extra lying around? where you guys finding these odd intakes?

 

Here's mine, little grunter..

 

that intake is kickass!!!!
I am also looking, so if anyone has a couple lying around i would like one also! THANKS!

 

I still need to make some aluminum wedges to level out the adapters, then get 2 more Webber 32/36 carbs and build the linkage.

 

slowly coming along. money is a little tight right now.

 

Mind if I drag up an old thread with a couple of shots of my old rig?

 

i haven't driving a slant 6 since i was a kid [had a 67 barracuda S] but remember that motor was a great engine,just a couple quick questions how do you level the engine?off the intake?and how do tell the difference between 225 & 170's.

 

Dduck, the carb pad needs to be level. Look right behind the coil and alt bracket - small section of the deck sticks out past the head. scrap off any gunk and you shoud see a series of numbers/letters stamped into the surface - the only numbers possible are 170,198, or 225 - there ya go! A quick eyeball is to look at the small piece of hose between the head and water pump - couple inches or so = 225 less prolly 170. Hope this helps. Great thread!

 

http://www.youtube.com/watch?v=SRbGy9yXhuE&feature=channel_video_title
Here, come for a nice liesurely tour of the return road/road course at Shannonville motosorts park. listen to the slant six churn away after a hard run down the track.
Don

 

www.redlineauto.com.au Australia still makes a few different manifolds for chrysler 6

 

my setup is almost done. maybe it will be done in time for hotrod reunoin.

 

Me likey!

 

Back to the top on Saturday night for the weird, lonely MOPAR geeks!

 

I know next to nothing when it comes to automobile carburetors,i'm getting a 225 slant 6 with a Offy 4 barrel intake for my car.well the guy wants to keep the carb off it,the only carb i have is quad-a-jet [size unknown at this time] & i have 2 Edelbrocks, i got em from a friend who ram em on his toys-so i know they worked at one time,they're both stamped,
carb #1 is 1405 2261- #2 is 1405 0492.
so what size are they? and can i jet em down to run on the 225 /6 with a kit?
any help or ideas?
__________________

 

Find out what carb was on the motor when the previous owner was running it and try to match it. Slants in their stock form hate 4bbls unless you port the piss out of the intake and head. In my daily driver 69 D100 SWB I run a 225 with a bigger cam, headers, ported head/intake, Offy 4bbl intake with a 400cfm carter and that carb is still a little big. The good combo for a slant is... Offy intake, Holley 390cfm carb.

1405 is a 600cfm carb...way too big for a stock or lightly modified slant.

Oh and whatever mopar engine you have, get rid of that shitty big ass stock starter and get a mini starter off a Dakota. They bolt on to everything from a slant to a hemi!