Register now to get rid of these ads!

HOLES THREAD...drilled axles,backing plates,anything.lets see'em

Discussion in 'The Hokey Ass Message Board' started by a.y1320, Mar 21, 2009.

  1. it didn't have holes before.. and it just wasn't light enough for hot-rod eating.. so we milled some holes in it
    [​IMG]
     
  2. Woody 2 that's damn nice work!!!
     
  3. 19Fordy
    Joined: May 17, 2003
    Posts: 8,025

    19Fordy
    Member

    From Adam's Chop Shop
    [​IMG]
    [​IMG]
     
  4. [​IMG]

    My shifter & pedals
    [​IMG]
     
  5. 117harv
    Joined: Nov 12, 2009
    Posts: 6,589

    117harv
    Member

    One of my favorites.....anymore pics:):):)
     
  6. fleetside66
    Joined: Nov 20, 2006
    Posts: 3,003

    fleetside66
    Member

    O.K. Harv, here's your fix.

    [​IMG]
     
  7. woody2
    Joined: Aug 19, 2007
    Posts: 162

    woody2
    Member

  8. Smokey2
    Joined: Jan 11, 2011
    Posts: 919

    Smokey2
    Member

    "Holy Posts"


    _________________
    Good thread, Thanks Guys, Smoke' :D:D
     
    Last edited: Jul 11, 2011
  9. firingorder1
    Joined: Dec 15, 2006
    Posts: 2,147

    firingorder1
    Member

    Shift lever.

    [​IMG][/IMG]

    Brake lever.

    [​IMG][/IMG]

    Tach mount.

    [​IMG][/IMG]
     
    Last edited: Jul 11, 2011
  10. Bandit Ls-1
    Joined: Feb 22, 2008
    Posts: 34

    Bandit Ls-1
    Member

    heres my contribution.
     

    Attached Files:

  11. Lucky3
    Joined: Dec 9, 2009
    Posts: 652

    Lucky3
    Member

    And doin it inside the house ! Very cool !!
     
  12. I have lots of second hand holes for sale if anybody needs some....
     
  13. Drool...very nice Tinman...yeah, I know it was 2 years ago...still super nice
     
  14. Morrisman
    Joined: Dec 9, 2003
    Posts: 1,602

    Morrisman
    Member
    from England

    I'm quite partial to holes too. :D

    [​IMG]
     
    neilswheels likes this.
  15. jammersspeed
    Joined: Sep 28, 2010
    Posts: 346

    jammersspeed
    Member
    from herman mn.

    cool thread! some very nice work!!!
     
  16. Grommet
    Joined: Oct 24, 2008
    Posts: 532

    Grommet
    Member
    from South GA

    This is my contribution. Front radius arms, rear radius arms, front and rear backing plates and some of the frame braces and motor mounts. 321 holes and counting.....going for an even 500

    Grommet
     

    Attached Files:

  17. Grommet
    Joined: Oct 24, 2008
    Posts: 532

    Grommet
    Member
    from South GA

    This is my contribution. Front radius arms, rear radius arms, front and rear backing plates and some of the frame braces and motor mounts. 321 holes and counting.....going for an even 500

    Grommet
     
  18. Frontend for my '27 T Coupe...

    [​IMG]
     
  19. langy
    Joined: Apr 27, 2006
    Posts: 5,730

    langy
    Member Emeritus

  20. Da Tinman
    Joined: Dec 29, 2005
    Posts: 4,222

    Da Tinman
    Member

  21. vwdave30
    Joined: Nov 21, 2009
    Posts: 457

    vwdave30
    Member

  22. outlaw256
    Joined: Jun 26, 2008
    Posts: 2,022

    outlaw256
    Member

    holes? hell you guys are drillin them while im still trying to patch them up.!! but everything looks good on here and has given me a few ideas.
     
  23. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,421

    64 DODGE 440
    Member
    from so cal

    Easier to make holes than to patch them. :p
     
  24. Beat up bumper?......Drill out the bad spots
     

    Attached Files:

  25. langy
    Joined: Apr 27, 2006
    Posts: 5,730

    langy
    Member Emeritus

  26. Don's Hot Rods
    Joined: Oct 7, 2005
    Posts: 8,319

    Don's Hot Rods
    Member
    from florida

    Just spent the last two hours reading this entire thread and it was worth every minute ! :D Some VERY cool workmanship by some VERY skilled builders.
    (There were also a lot of ideas I will steal.........I'm not above that, you know. :p)

    Don
     
  27. davidfe
    Joined: Jan 1, 2006
    Posts: 135

    davidfe
    Member
    from Illinois

  28. vwdave30
    Joined: Nov 21, 2009
    Posts: 457

    vwdave30
    Member

  29. VoodooTwin
    Joined: Jul 13, 2011
    Posts: 3,453

    VoodooTwin
    Member
    from Noo Yawk

    Hole-y moses, so kewl! :D
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.