Register now to get rid of these ads!

Hot Rods My New Baby! 1933 Pick up

Discussion in 'The Hokey Ass Message Board' started by Sunshine14, May 14, 2011.

  1. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    I still think its a dream! The truck was only a block from my house! Im too excited to type.......... im going back outside to work on it.:D
    [​IMG]
     
  2. Man.....a dandy find.....congratulations. Doesn't look as if it needs much.
     
  3. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    just a lot of love and rust repair. I all ready replaced the fuel tank and lines, because they where filled with rust. I stole the spun tank of my dads old sanrail lol
     
  4. captainjunk#2
    Joined: Mar 13, 2008
    Posts: 4,420

    captainjunk#2
    Member

    pretty cool looking ride how about a couple side photos ,drive safe
     

  5. MrGasser
    Joined: Oct 24, 2001
    Posts: 2,074

    MrGasser
    Member
    from DETROIT

    Cool...is that a cross-ram intake?
     
  6. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 31,226

    Jalopy Joker
    Member

    Boy, you sure are lucky-have fun
     
  7. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    Thanx and yes its a cross-Ram!!!!
     
  8. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    im having to change out the carbs cause i had a fire friday night. Last owner didnt use any gromets on the fire wall and a electrical wire arcd and lit one of my fuel lines, and fried the carbs
     
  9. lowsquire
    Joined: Feb 21, 2002
    Posts: 2,567

    lowsquire
    Member
    from Austin, TX

    Are those rear tyres the Indy profiles with the 'capital I' shaped tread blocks? I LOVE those tyres, always wanted to build a sleeper style Galaxie around a pair of those..
     
  10. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    Yep, they sure are!
     
  11. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    happened friday the 13
    [​IMG]
    [​IMG]
    [​IMG]
     
  12. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    all fixed now a better then ever
    [​IMG]
     
  13. dudley32
    Joined: Jan 2, 2008
    Posts: 2,160

    dudley32
    Member

    More pics...back and side...
     
  14. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    ill go get some and post them up tonight
     
  15. fleetside66
    Joined: Nov 20, 2006
    Posts: 3,006

    fleetside66
    Member

    What sort of trans & rear? What year motor? I noticed that you changed to non-vented valve covers (nice improvement)...are you doing an inline PCV from the road draft tube hole to the carb? How much of a channel to it? Are you considering chopping it? That sucker is gonna go!
     
  16. fonti
    Joined: Nov 28, 2006
    Posts: 494

    fonti
    Member

    cool ride, man - enjoy it!!
     
  17. 067chevy
    Joined: Sep 18, 2005
    Posts: 2,073

    067chevy
    Member

    Replace the model a bed with a 33,34 bed will help the looks alot
     
  18. caseyscustoms
    Joined: May 15, 2005
    Posts: 1,031

    caseyscustoms
    BANNED
    from st.joe, MO


    x2.

    looks like a cool little project congrats
     
  19. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

  20. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

  21. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    last owner said that his radiator had two small outlets and so thats what he ran. "run whatcha brung!"
     
  22. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    finally nice weather, i can rive my truck again!
     
  23. Probably a flathead radiator,,HRP
     
  24. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    i think your right but did they use small hoses like that?
     
  25. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    having high oil pressure issues since i went to just on breather off the oil filler tube, if i run a pvc type breather of of the oil filler and run a vacuum line to the carb, will this help the issue? Cause right now i have terrible oil leaks and i keep blowing my breather off....
     
  26. Sunshine14
    Joined: Jun 22, 2009
    Posts: 549

    Sunshine14
    Member

    yep that fixed it
     
  27. HOT ROD BILL
    Joined: Apr 7, 2007
    Posts: 714

    HOT ROD BILL
    Member

    Nice truck, let's race.
     

    Attached Files:

  28. das858
    Joined: Jul 28, 2010
    Posts: 1,017

    das858
    Member

    Cool truck, I like the wheels, intake and carbs too.
     
  29. Life is good, aint it!!
     
  30. Dynaflash_8
    Joined: Sep 24, 2008
    Posts: 3,038

    Dynaflash_8
    Member
    from Auburn WA

    good looking little truck. Id move the radiator and grill back a bit. The open space between the motor and rad ruins the proportions.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.