hey guys, I need to put some patches into my decklid and figured a portable blaster would be a good tool to have. my local Harbor freight has a 50# blaster on sale for $20. anyone ever used one?? http://www.harborfreight.com/portable-abrasive-blaster-kit-37025.html
I imagine you'll get what you pay for. On the other hand it's only $20 lost if it doesn't do the job.
that was my thought, it's on sale for 50% off and I can get another 20% off the $20 so it will only actually cost me $16. I've used the little hand held canister type blasters in the past and those SUCK. This seems like it might be a little more capable than those. I like to ask about harbor freight stuff because some is ok, although most is junk.
performance will be based on your compressor output and dry abrasive. And how quick the tip wears out. Might get a job or two out of it.
use a couple of their other blasters and have been very satisfied-for the money can not go wrong-they usually have some glass bead and fine sand For Sale-have found best deal on sand at local cement supply company
Ive used that same set up.....just keep in in your hand as you will need to shake it from time to time........It works good but the best bang for your buck is http://www.tractorsupply.com/tools/...s/clarke-siphon-feed-abrasive-blaster-3907837 and a 5 gallon bucket
stuff is ruff you have to keep your gun moving evan if it doesnt get it all the first go around....and hold it at a angle mabye 45 degree I toasted a door staying on one spot to long
they also have a finer version, think that would be better?? the black diamond is 20-40 grit, they have a 30-60 grit that they say is for light duty blasting?? both are 7.99 for 50lbs description from TSC web page: Grit | Brand : Little Fury | Type : Fine Blend | Size : 50 lb. | Grit : 30-60 | Material : Coal Slag | Application : Minimum 1/8 in. Nozzle Required | Safety Feature : Less Than 1% Crystalline Free Silica With Little Fury Fine Blend (30-60) Blasting Grit you get the rip and grip power of ATI Black Diamond granules in a fine blend that's perfect for light applications. Light rust Light mill scale Light coatings Produces slight profile Used for a white blast
I've got one, it doesn't work too bad, just need a compressor that can keep up wit the required output. It's great for spot blasting small areas, I'd imagine if your doing a whole car it would take a good while to complete. I've always used a fairly fine grit in it. If you do get it, buy a better hose than the one it comes with, it is terrible it dry rotted in a few weeks on mine.
that's really all I plan to do with it. I'm currently replacing the corners of my decklid and don't want to send the entire body out for blasting yet. Plus the tig welder can get a little finicky about lingering rust
Sand blasters of any kind work as well as your compressor/air supply. They act the same as cutting the end off the air hose and letting it rip as far as the compressor is concerned and often compressors can't keep up. The Clarke blaster that Tractor supply has is also available from Summit for the same price. It's in Summit's Ebay store too 330528511137 I don't think you can buy fittings and make one for that.
I got a few like that..they work on siphon, like most blast cabinets nice for small jobs, and light media..nothing coarse., and you will need to have a good air supply.
I just bought the same blaster for some light blasting that I need to do. Haven't taken it out of the box yet. The reviews were overall positive though. One thing I used to do when I was paid to blast everyday(ughhh!) was run all of my media through a screen on top of a funnel to make sure only the finest grit, and not crap get into your siphon bucket. This saves a lot of time unclogging the gun...
I have one that I got at Sears maybe 20 years ago. Never has failed me on the small parts. Still using the orginal tip too. HF can sell you extra tips if needed.
very good advice if you dont have one , go buy a screen that your media passes thru..but not the crap. that way you can reclaim some of the media, and re use it. without the crap in it that plugs your hose , nozzle or feed
I just tried a bag of TS "fine". It's kind of a smaller bag than when I buy sandblasting sand, but it did clean out the rust pits very good in that grit. A hopper siphon blaster will use much more air and media, and take more time, but it will work.
Thanks for the tip on the TSC gun. My HF gun fell apart in my bead blasting cabinet due to a stripped set screw that was not installed correctly. I use the handheld guns for small parts, one for sand the other for baking soda.
You hit the nail right on the head. I had a similar HF sand blast unit. It was frustrating to use because my compressor couldn't supply enough CFM of air at the required pressure to just blast away. Nobody ever talks about the CFM required for sandblasting. It is critical!
i think i would buy one of these, you dont have to wait for the media to be sucked up and so i think you would use less air, i have a pressure pot for large things, i might pickup a gravity feed next weekend for little thing, i have a syphon feed as well and they just dont seem to work very well. http://www.harborfreight.com/21-oz-hopper-gravity-feed-spot-blaster-gun-95793.html i'll be buying mine here http://www.princessauto.com/worksho...blasters/8140709-gravity-fed-sandblasting-gun