Show me your 3x2 and 6x2 SBC Setups

I will see Fotos
I like this setups a lot

 

This is the one I am using.

 

First pic is 2x4 tunnel ram , car is now overseas . the second is my current ride .

 

Turkeyjerk's T...

installation...


running around town on all 12 barrels...

 

Check out the gallery in my website. You'll find all kinds of ideas. Oh, the above fuel rail is an Eelco.

 

Heres one I picked up this summer.

 

Here my 3x2 setup. It's an offy intake and three 97s.

 

Here is my friends 6x2 system. He seems to have it dialed in much better than my 3x2

 

my coupe

 

edelbrock ML 6x2

 

here's my current setup

 

here's one I set up for a friend a few months ago...

 

my small base 2gs on a vintage Fenton 3x2

 

My old '58 Chevy.

 

James Mound dry lake stacks, 59' gm 3 deuce carbs, eelco linkage, 59' 348 intake.




<SCRIPT type=text/javascript> // <![CDATA[ $("#imgElement").load(function() { resizeImg(); $('a.thickbox').attr('name', '
View Raw Image'); }); // ]]> </SCRIPT>

 

Why is it that these Velocity stacks make anything look even more bad ass then it already is!!!

 

Here's my shop truck

Here's my coupe, very dirty

 

what about 4x2? one i just picked up.

 

Here's my set up....

 

These are my six other women..........They eat four barrels and have feasted on some stack injected alky setups..even beat some superchargers as well.....if they could talk...they would ask, '' so how does it feel to be beaten by antique carburators? ''......These setups can be very effective if you put in the time for both street and Strip duty...nothing neater than prowlin thru a swapmeet looking for cores, picking them up dirt cheap...then taking them home and machining them and rebuilding them to better than new spec's and then kicking ass @ the Strip w/ them..The only down side is the amout of torque you give up over the modern intake and four barrel setup.........One does not know what works unless they try it !...some get hung up on theory and say it should not work because of this or that.....screw your theory, just try it..you may surprise yourself......Littleman

 

this has been on truck since 1974

 

Edelbrock x-1 crossram 6x2 polished

 

And a tasty one at that HomemadeHardtop57!!! I gotta get my shit polished!!!

 

This is the setup in my
'57 Chevy

 

here is a three/ two Rochester 2g setup by Larry Fulton of Hotrod carbs / Automotion on a 63' 327 Chevy. yes a Chevy in a Ford, for redstone restoration llc in Sisters, Oregon. the car is a 49 ford Woodie. http://www.redstonerestoration.com

 

I have seen the light....and it is good. Chrome is heaven. Awesome!!!! I have a set of Offy Valve covers at the polisher's. I love the Offy's especially when they are not cluttered with breathers and such. Are those Chromed? They're so damn shiny!

 

The intake manifold and valve covers are
chrome. After all the years of trying to
keep them "shiny" I gave up and sent them
to Advanced Plating in Nashville.

 

It's beautiful!!! Definitely a nice touch!