Where to find Aluminum sheet in Atlanta?

I need a shitload of aluminum (I've read on here that 3003-H14 50" or 5052 40" is best) - for my floor, front/rear bulkheads, door skins, trunk floor, etc.. 5/6 sheets?

In England I used to buy 8x4' sheets with the blue plastic protective film on it - but I'd settle for any sheet without the film I guess.

I haven't been here long enough to find the source for this kinda stuff - who can I call or where can I go to pickup?

I'm in McDonough, but I'll go anywhere.

Tudor, Stevie G, BigMikeC, hotrodwalt, GreenMtnBoy, PBRmeASAP - I just know one of you guys knows the answer

 

I've found a lot of it bolted to little steel post on the side of the road. Makes great floor boards.

 

HAHA! yeah, ok - do you face the numbers up or down?

 

Check with"T W Metals",located on the frontage road in Forest Park,and Tom's Ornamental Iron Works,near the airport.

I also saw yesterday a "Metals Supermarket" or "Metals Warehouse" truck pass me going the opposite direction.

That was the first time for that one,and I do not know their location.

 

If you want to come to macon ga here is the name and phone no.industrial alloy supply,1968 waterville rd.478 750-9380. just bought a sheet of so for my dragster. they have most every thing in alum.

 

Metal Supermarkets. I do not know if they carry sheet aluminium.

http://www.metalsupermarkets.com/MSC-storefinder.aspx?MAP=USA&region=GA

Hi Chuck.

 

Thanks, great leads!!

 

Howdy,Andrew.

I miss ya',ya' HUMP!

 

I get all my steel and aluminum from Metro Metal Works in McDonough.

Here's their info:

Metro Metal Works
3051 Commerce Pl
McDonough, GA , 30253-6800
Phone: 770-954-1159

 

wow! right under my goddamn nose. Thanks Curtis!! I'll be jumping in the car right after lunch to go visit...

 

got it, great tip thanks Curtis. I still can't believe the stuff is $94 a 4x10' sheet though...wow.

 

Petersen aluminum!! google it!!

 

Don't forget McMaster warehouse on Fulton Industrial

 

I used to get mine from a metal supply warehouse (ontario metal) but was turned onto a roofing supply company. 4x10 sheets were half the cost & they had colors too. Check your area for commercial roofing places

 

Do you guys know this is a three year old post? I think the guy moved.

 

Still good info for other buys living in the Atlanta area. Took me forever to find a place to buy metal stock.
The metal supermarket in Doraville is great... they also have "drops" and cut-offs they sell for scrap weight prices.

-Brad

 

Yeah, I'm in Austin TX now. Great town.

 

So you are the guy who has getting all the drops before I get there ....