Art & Inspiration The Photoshop thread to end all Photoshop Threads!

This is a photoshop of a car I've wanted to build for about 30 years. Blown hemi coupled to a TH425 (Toronado style transaxle). Maybe some day...

 

ok fellas. i need just one more thing. i cant decide if i want to do flames or watson style scallops on the van. can yall help a brotha out and show me both

 

Anyone care to take a shot at using this color scheme and wheel/tire combo:



On this:



Thanks,

Dave

 

like this: http://yfrog.com/f/e3falcoonj/ ?

 

For what it's worth, here's your car with black rims.

 

I didn't want to start a thread , but what do you all think of my stance?
All new springs and front end parts.1 coil off the rear , 3 in front [ big block springs]

 

Looks good so far. What wheel/tire combination you going to use?

 

Thanks, Bobj, that looks pretty good. Would you mind also taking an inch or two out of the stance?

-Dave

 

A quickie... about a 3-4 inch drop.

 

The wheels and tires that are on it. I'M painting the rims the body color [ white] starting the body tomorrow.

 

Dave,
Here's your Gasser version. I like the hell out of this color!
Eli

 

Getting close to thinking of colors . I had in mind the Dove Grey body with darker grey fenders and splash . Or maybe something else may work . Thought of Dove Grey and Black fenders also .

If someone can photo shop me some ideas maybe I can lock some thing down . The interior is stock lebaron bonnie original Grey-blueish color. Also I do want all solid enamels . I have steel wheels that will be black with dog dish and trim rings .

You almost have to go supply store and say give me that and run out .

 

there is some true talent running around on this thread. i would like some idea of what my truck will look like before i start in the wrong direction. i would like to fill in the front end (willy's style) and run a '53 corvette grill. i am thinking black body with copper fenders. thanks in advance, i spend hours looking at the work done on here and am constantly amazed. and if it is not too much trouble set it down where it should be... low.

 

Here's a quick(and somewhat sloppy) flame job. I couldn't think if any color of flames that would look good so I just went with some orange "ghost" flames.

 

I'm thinking about picking up this '60 for a daily driver. Could someone Photoshop her in gloss black with a heavily flaked deep burgandy fading into dark purple roof? (I guess from this angle you wouldn't be able to see the burgandy in the middle of the roof, just the dark purple on the outer edge of it) Also, lowered a couple on inches on black steelies with WWW. Thank you in advance.

 

Need some photochop help. Can someone either change the orange 41 to satin black or change the tires and wheels in the black car to wide whites and black steelies with a slight lowering. i thank you in advance

 

It turned out kind of fuzzy but you get the idea

 

Thank you man, I appreciate it.

 

I slammed it in Microsoft paint. If I can sell my O/T daily driver '03 P71 I'm going to pick up this Le Sabre hopefully.

 

...

 

can someone photoshop my buick . would like to see it in a baby blue or powder blue with white scallops. or a candy gold with white scallops. thanks

 

Have any of you photoshop pros seen these?...

-I'm no damn good at photoshop but found this guys tutorials funny and informative, this is part 2 of a 20 part series...

He has a different way of doing things while saving a lot of time..
<object height="525" width="660">


<embed src="http://www.youtube.com/v/VXeZ0s8DXZ0&hl=en_US&fs=1&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" height="525" width="660"></object>

Rather than using the magic wand or erase tool for hours on end....
<object height="405" width="500">


<embed src="http://www.youtube.com/v/x-8hQh6hdnI&hl=en_US&fs=1&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" height="405" width="500"></object>




.

 

I didn´t have time to paint the whole truck - sorry.
I just couldn´t leave the stock headlights on there, so I fitted matching Corvette units. Willys items might well be an easier fit at a guess.

 

donny is damn funny!! youtube taught me a lot about photoshop

 

To get the whole of the story a guy really has to watch from part 1 (and try not to laugh your azz off)...



.

 

yeah, alst video i saw the cops were outside demanding he turn himself in LOL

 

holy crap james d. i love it. the headlamps are an excellent idea. bonus, i just happen to have a set. that is totally the look i was hoping for but so much better. thanks so much, i will post pics once i get started. i love the ww's and wheel covers also. thanks again.

 

Keep us updated, I´m looking forward to seeing some pictures.