Should i chop it?

I like them both ways. But I like them without the chop more so. But do it your way.

 

I'll do it...

you can PM me if you decide you want to chop it...

 

Do I have to say more...

 

Chop that bad boy, they sit way too high uncut....

 

they will be making reproduction bodies at some point so don't let that bother you and just start chopping

 

chop it!!!!!!!! Look at the pics above, the chopped look is great and much better than stock. I cannot believe they built them that high in the first place.....

 

That Blue one looks sweet about how big of a chop is that?

 

absolutly chop it...4 inches.

 

That cars got good lines you could leave it and it would look cool. But if you wanna chop it make it look good and also so you can fit in it

 

i vote to chop it, but whatever YOU think is best. its YOUR car do whatever makes YOU happy not someone else.

 

No, there aren't enough tall coupes around. I think they are really cool and far too rare. But as all else will say.. Do it your way.

 

If you can fit in it chopped, then chop it.

 

Well I don't care if you chop it or not....I don't understand why you would want to loose the fenders! You have three good ones and only one that needs repair. Get a dropped axle and set 16" wires or steelies and your golden! JMHO But hey, good luck with your project.

 

Your car, but it's probably worth pointing out it's easier to change your mind and chop it later.

Plenty out there are both ways, if you want to be different you'd have to chop it on just one side... I don't know how well that would work.

 

No Leave it. If your going to chop it just send it to me and I'll find you one already chopped.

 

give her a hair cut!!

 

i'll let ya borrow my plasma cutter. get on it.

 

chop it and if you dont like it put it back its just metal

 

ha ha! you just made me laugh out loud!

 

Chop it!! If it's going to be a hotrod then it should be chopped! I don't know where these people come from that say model a's shouldn't be chopped. Thats ridiculous! This isn't a restoration site; it's a hot rod site. It's just a model a after all - so man up, got out you hacksaw and drop the top! Just my opinion.

 

chop it if you're not too old to have a chopped hot rod...

 

Build the car first, if you want to chop it later that would be the time to do it IMO.

 

Go buy an old wasted 30's or 40's truck cab and practice on that. When you feel comfy with doing the chop then I say whack out 4" from it!

 

ahhhhh !!!! yeah!!!!

 

yes

 

Ha Ha! Or........ just chop the rear!

Actually I vote no chop.

 

CHOP IT = 2 1/2" - 3" , put the 32 frame under it, run a flatmotor, have fun and be safe!

 

I can't see chopping the top as the first step in any project. I change my mind so often about so many things during a project I could never chop first and build around that. Build the A model coupe of your dreams then stand back and look at it for a while. If it needs chopped it'll tell you. There used to be an A coupe here locally that just begged to be chopped but then I also remember another one that was chopped and just looked stupid.

 

Guess i need to get it on some 32 rails and see from there

 

Take the axe to it...