turbo 350 question

I'm not running a speedo .Is there a threaded cap to block it off at the trans where the speedo screws into? I used a piece of dead end heater hose (it leaks)but I was wondering if theres something better,what do you use?

 

Take out the "slug", and put in a freeze plug the right size? Or just replace the seals, it should not leak.

 

I think there is a fork looking bracket that has 1 bolt when you remove the bolt you can pull the plug that's got a gear on the end,replace the O ring around it and that should stop the leak.You don't have to run a speedo..and it should not leak with out a speedo

 

exactly mine does not leak without a speedo cable attached.

 

There is a " O " ring on the bullet.



The bullet is held in place by a small metal tab



REPLACE the " O " ring
They are about a dollar ... or so



Leak solved.