Anybody ever heard of NANCO tires? I stumbled upon auction #8045393772 on eBay and thought this seemed like a pretty decent deal for a set of 650-16 bias ply tires in blackwall. $147.99 for two including tubes. They've got that great piecrust sidewall design that I love on old cars so now I'm waiting to hear the downside... they fall apart in 150 miles or something, don't they? If something seems to good to be true...
NANCO Is the 2nd largest trailer tire manufacturer. Great trailer tires. Haven't checked the auction but 6.50/16 is a common trailer tire size. Checked it out....I'd roll those at that price. get 'em.
That's one of the applications they list, but they do specifically mention use on trucks, antique cars and "rat rods" in the auction. I'm just thinking of all the agricultural tires I've seen over the years with warnings not to exceed 25mph on the sidewall. Amusingly, the only trailer I've seen with bias plies on it had Firestone Champion Deluxes.
Make sure to check the date code on the tires you are buying. Old tires are dangerous. They could be unloading some very old stock on E-bay that could come appart when they get up to speed on a hot day and ruin your ride.
Alot of the older Nancos were recalled for safety reasons. example- blow apart at 25 mph. My holiday trailer came with them in 05 and they were recalled
Good point. If you get me the DOT number, I can decypher it for ya. But basically, the last 3 or 4 digits will be the week and year of manufacture.
trustin tires is like trustin condoms... would you do that tijuana prostitute with cling wrap spun around you a few times? or would you look around and drop a few more bucks on a trojan so your old lady doesnt get itchy when you get home?? get some firestones or denmans or something similar
I have some 7.00 x 15 LT tubless nylon Nanco tires on my "T" modified. I bought them at Farm & Fleet. I've only had them up to 90 mph...I was more nervous about the Coker ribs on the front. They work fine, but being a truck tire they are a bit stiff. I think I'm running them with about 20psi. They look like some of the tires in "The Birth of Hotrodding" book. I think they also make a 7.50 x 16 tubeless tire .
Old post but I just saw some of the same tires on Ebay and they are way less expensive than other brands I've seen... "(2) 600-16 6 PLY TIRES PAIR BIAS RAT ROD TIRE 6.00-16" $160.00 for the pair. Any additional input on these tires?
I put some on a stock Model A that had 16 inch wire wheels on it. I liked them but never had it faster than 40 mph. They sure look ok to me.
This is the Ebay seller. They were 219 there, direct they are cheaper. http://www.gearworksmfg.com/classiccartrucktires/nancobiastires.html
I do believe that these tires are 8 (at least) ply construction. That's typical for truck and trailer application and, as a result, are really stiff. Passenger car tires in the bias ply era were usually 4 ply.
they are just so much cheaper than firestones or anything else from places like Coker... I guess there is a reason for that?
They're a mass-produced trailer tire instead of a specialty reproduction tire. Larger market = economy of production = less expensive product. You can also figure that these are only being promoted for passenger car use by an unknown middle man who will probably disappear next week, and would likely be judgment proof even if you found him. Compare that with a nationally known company like Coker, and you can see where there might be greater concern for safety in the quality control process. -Dave
I can second that. I just looked at some 6.00 x 16 NANCOs at a local tire store this week. They were new and had current production dates. They had nice looking tread and were not bad looking at all... except for the BIG *MADE IN CHINA* text under the name. There is a lot of text on the sidewalls on both sides too. For the money, they seem just fine. The good-ol-boy price is less than 4-bills for 5 tires so, for a budget build, they definitely deserve a look.
I worked in a tire shop for a while, we sold alot of them to farmers for trailer tires. Those babies are TOUGH! Never once saw one come in needing a patch and they were being run on flint rock gravel roads which are notorious for knocking down tires. They don't ride too bad on heavier vehicles but IDK about a light car.
I'd be so damned ashamed to admit some of the things I've done, but that aside, this seems to make sense about the tires. Best way to know, I guess, is talk to someone who bought and see if it has worked out. I would like to hear testimonials. Joel
I Just got back from Maxton about 600 miles with a new pair of 750/16 Nanco unbalanced and they did fine...
Yes they are 10 ply ,and a little hard . My logic was they can not be any worst than front tires ,so I took a chance...As I said they did OK....
Are the fronts repop dirt track ribbed tires, or are they actual ribbed implement tires like I see at Tractor Supply? I didn't think the latter were at all safe over about 10mph. -Dave
I've seen a thread where someone had sanded the lettering off NANCO's for a plain sidewall on a "gasser" look front tire. The tread is a pretty attractive pattern, not so blocky.
Looked on Ebay for these,couldnt find them.I thought the would look and work just fine on the Studebaker truck.
I ran a pair of the 6 ply 600 by 16 Nanco for thousands of miles on a teardrop trailer. Air pressure about 22 psi. No problems at all. In the west they can be ordered from Les Scwhab stores. Jerome