I used the "search" feature and couldn't find quite what I was looking for. I have a set of 35 Ford wires I want to use and I'm running a stock 46 Ford front and a 68 Ford 9" rear. I was told someone on here makes/sells adapters or at least can point me in the right direction. thanks
I you cut some 4" pipe into 3/16th's wide rings you can do it yourself. Lathe and cut off/parting tool. Tim
Agreed! The spacer rings are for the 40-48 hubs. You need the thick ones for the later hubs. Here are my rings and a pic of a wire wheel showing the gap inside the bolt circle. Wheels will warp if tightened without the inside support.
Wheelkid provided the ones for HAMBANDYS car.....they are awsome. If your going to get adaptors..........Wheelkid is the best option!