I've been working with Offenhauser to do a production run of the 2x2 intake manifolds for the Dodge 241 and 270 V8 engines. It's been about 20+ years since the last time they did a run of the manifold. In order to do it I would need an order of 25 manifolds. If you are interested in getting one of these hard to find maniflolds call me at 559-592-2707 or send me a PM. I would need billing info to secure a spot on the list, but YOU WILL NOT BE CHARGED UNTIL I GET THE MANIFOLDS. The pricing of the manifold will be around the $340.00 mark plus shipping. Tay Offenhauser has not confirmed the final price yet, but I feel safe saying the cost should be close to that. Currently, the pattern only allows the use of the 4 bolt small base Rochester 2GC carburetors. I am working to have Offenhauser add to the pattern so the manifold can be drilled for the 3 bolt Stromberg or Holley carburetors. Let me know what carburetors you will be using. I can't confirm a final delivery date yet, but the faster the order is placed the sooner I can get the manifolds. I would assume the maifold will be available in 12 plus weeks. The current patterns need to have some work done to make them production ready and the work on the patterns will not start until I place the order. Dan Marvin, Owner Exeter Auto Supply
I just talked with Offenhauser and the prototype of the single quad manifold is back from the foundary and they are doing machine work on it. The next step is to revise the pattern for production, finish the tooling and gear up for production. The 2x2 is getting pattern work to accept the 3 bolt carburetors then they have to protype it. Dan Marvin, Owner Exeter Auto Supply
I just got off the phone with Offenhauser and they are going into full production on the 2x2 and 1x4 manifolds for the 241 and 270. So I'm accepting orders now. Manifolds should be ready in 6 to 8 weeks!!!! The 2x2 will be $340.00 plus shipping and the 1x4 will be $360.00 plus shipping. Alliance member discount of 5% will apply to all alliance members! Dan Marvin, Owner Exeter Auto Supply
MANIFOLDS ARE IN!!!!! I've got the 2257 1x4 and the 1186 2x2 manifolds. The 2x2 manifolds can be ordered for the 3 bolt Stromberg/Holley carbs or for the 4 bolt small base Rochester 2GC carbs. Dan Marvin, Owner Exeter Auto Supply
Now thats way cool. Have you asked them about DeSoto yet??? Besides gold bullion, what payment methods do you accept? .
Gold would be best...but i do take all major credit cards and money orders. No US savings bonds. Dan Marvin, Owner Exeter Auto Supply 559-592-2707
Dmarv...Even though I don't have a Baby Hemi...mines a 331...I know how rare original 4bbl and 2x2 manifolds are/were so a big THANK YOU for doing all the leg work on this one!!!