Register now to get rid of these ads!

HEMI Tech- General parts and info resources

Discussion in 'The Hokey Ass Message Board' started by scootermcrad, Jul 3, 2006.

  1. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Okay! Pressing on until you vote these away...

    The most important thing is where to find info and parts to build your Mopar super Hemi! Let's post any info you may have here. Venders, machine shops, tech places, boards, etc. Any place you can turn to until it's all posted here on the HAMB. Your welcome to even include your OWN info if you think you have some answers or a service that would help someone get their Hemi built.

    I'll start with some links from Victory Library. Panic has a great website with lots of info. Great books on other topics as well. Here's his site:
    http://victorylibrary.com/mopar/hemi-c.htm
    Here's the links for your quick reference. Please add more if you have them. Resources and vendors only! Your experiences with these places would also help for reference, I suppose.

    CONTRERAS CAMSHAFTS....
    SHOP phone...909-597-5950
    Chino, California.


    Crankshaft Specialist
    [crank repair; welded strokers]
    280 Tillman; Memphis TN 38112
    1-901-452-6663; Fax: 1-323-7776


    Egge Machine Co.
    [pistons; valves; guides; bearings]
    11707 Slauson Ave. Santa Fe Springs; CA 90670
    1-800-866-5440; 1-562-945-3419

    http://www.egge.com

    Federal Mogul
    [bearings]

    26555 Northwestern Hwy. Southfield MI 48034http://www.federal-mogul.com

    FelPro Inc.
    [gaskets]
    7450 N. McCormick Blvd. Skokie IL 60076
    1-708-674-7700

    http://www.fel-pro.com

    Ferrea Racing Components
    2600 N.W. 55 Court; Suite 238 Ft. Lauderdale Fl 33309
    1-954-733-2505; 1-888-733-2505; Fax: 1-954-735-2179

    http://www.ferrea.com
    [email protected]

    Flatlander Racing
    [crank repair; welded strokers]
    24 Elm Street Plaistow NH 03865
    1-603-378-0090; Fax: 1-603-382-7508

    http://www.flatlanderracing.com
    [email protected]

    Hale Performance
    [engine building]
    Box 1518 Van Buran AR 72956-1518
    1-501-454-5252


    Hotheads Research & Racing
    Power Play
    276 Walker's Hollow Trail, Lowgap, NC 27024
    1-336-352-4866 Fax: 1-336-352-3892

    http://www.hothemiheads.com[email protected]
    NOTE: Please do your research on Hot Heads. A large amount of quality related threads here on the HAMB.

    Iskenderian Racing Cams
    16020 South Broadway Gardena CA 90248
    Fax: 1-310-515-5730; 1-323-770-0930

    http://www.iskycams.com/

    JE Pistons
    15312 Connector Lane Huntington Beach CA 92649
    Fax 1-714-893-8297; Sales 1-714-898-9763

    http://www.jepistons.com/pdf/2002-je1-3.pdf

    JMS Racing Engines
    Monrovia CA; 1-626-357-2718http://www.jmsracing.com/

    Kanter Auto Products
    [pistons; valves; guides; gaskets]
    76 Monroe St. Boonton NJ 07005
    1-800-526-1096; 201-334-9575; Fax: 1-201-334-5423

    http://www.kanter.com

    KB/Silv-O-Lite
    [pistons]

    http://kb-silvolite.com/spistons.php?action=start

    Offenhauser Sales
    [intake manifolds]
    5300 Alhambra Ave. Los Angeles CA 90032
    1-213-225-4138


    Manley
    [valves; rods]
    1960 Swarthmore Avenue Lakewood NJ 08701
    1-732-905-3366


    O'Brien Truckers
    [valve covers]
    29 A. Young Road Charlton MA 01507-1559
    1-508-248-1555; Fax: 1-508-248-6179

    http://www.obrientruckers.com
    [email protected]

    Ohio Crankshaft
    [crank repair; welded strokers]
    5453 State Rd. 49 Greenville Ohio 45331
    1-800-333-7113; 1-937-548-7113; Fax: 1-937-548-4603

    http://www.ohiocrank.com
    [email protected]

    Paul's Crank Shop
    [crank repair; welded strokers]
    650 County Road 664 Devine Texas 78016-4628
    1-830-665-4307

    [email protected]
    http://www.devtex.net/paulscrankshop/stroker.htm

    Performance Auto Warehouse
    21001 Nordhoff St. Chatsworth CA 91311
    1-818-678-3203; Fax: 1-818-407-7204

    http://www.pawengineparts.com/

    Quality Engineered Components
    POB 6868, Bend, OR, 97708
    541-617.0613
    888-HEMI-PARTS

    [email protected]



    RAM Racing Engines
    [engine building]
    3107 Odd Fellows Road Lynchburg VA 24501
    1-434-846-0043; Fax: 1-434-846-2526

    http://www.ramracing.com
    [email protected]

    Reath Automotive
    [crank repair; welded strokers]
    3299 Cherry Avenue Long Beach CA 90807
    1-310-426-6901


    Rev Engineering
    [covers, accessories, and oil pump adapters]

    http://hemireveng.net/Default.aspx

    Rocker Arm Specialist
    19841 Hirsch Ct. Anderson CA 96007
    1-530-378-1075; Fax: 1-530-378-1177

    http://www.rockerarms.com/Chrysler.htm[email protected]

    Sanderson Headers
    202 Ryan Way South San Francisco CA 94080; 1-800-669-2430


    Smith Bros.
    [pushrods]
    1320 Southeast Armour Road Bend OR 97702
    1-541-388-8188

    Smithberg Racing
    Cylinder Head CNC Machining/programs and various parts for Dodge, Desoto, and Chrysler Hemis
    1901 Clay Street, Fort Calhoun, Nebraska 68023
    Contact - Nick Smithberg
    402-616-7643

    [email protected]
    www.smithbergracing.com

    Stan's Headers
    4715 Auburn Way North Auburn WA 98002
    1-800-962-6467

    [email protected]http://www.stans-headers.com/parts_frame.htm

    Tex Smith Books
    "The Complete Chrysler Hemi Engine Manual" by Ron Ceridono

    T. R. Waters
    [adapters]

    T. R. Waters' Site
    [email protected]

    Velasco's Billet Crankshafts
    12422 Benedict Ave. Downey CA 90242
    1-310-862-3110; Fax: 1-310-803-1221


    Weiand Automotive
    [intake manifolds, water pump adapters]
    2316 San Fernando Road Los Angeles CA 90065
    1-213-225-1307

    http://www.holley.com/index.asp?division=Weiand

    Wilcap Company
    [adapters]
    P.O. Box 763 Pismo Beach CA 93448
    1-805-481-7639

    http://www.wilcap.com
     
    Last edited: Jul 18, 2018
    51 mercules and kidcampbell71 like this.
  2. ProEnfo
    Joined: Sep 28, 2005
    Posts: 1,498

    ProEnfo
    Member
    from Motown

  3. krooser
    Joined: Jul 25, 2004
    Posts: 4,584

    krooser
    Member

    K and B Engines
    S317 Mann Road
    Marshfeld WI 54449

    Kerry and Phil have a busy engine shop able to handle everything from vintage tractor engines to full race engines including early Hemis.

    These guys do a great job on ANY vntage engine....
     
  4. Wilcap
    Joined: Feb 23, 2003
    Posts: 16

    Wilcap
    Member

    Scootermcrad; Thanks for the mention. Address you list is from the earlier printing of the Tex Smith/Ron Cerridono book. Correct address for Wilcap is;
    P.O. Box 763 Pismo Beach CA 93448. email link is on website.Thanks again.
     
    kidcampbell71 likes this.

  5. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Great! Thank you very much for the update! These guys will appreciate it!

    I'm going to do a tech posting on adapters and related items soon. It would be great if you guys could add some info to that when I put it up. You guys are great providers for this! Thanks again!
    Scooter
     
    kidcampbell71 likes this.
  6. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    kidcampbell71 likes this.
  7. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 14,809

    Jeff Norwell
    MODERATOR
    Staff Member

    For any Canadians out there....
    http://www.forhemisonly.com/

    Tim Banning and his crew prepped my hi horse 392.....these guys are incredible
    they mainly do 426 stuff, but early hemis are not an issue.They have done quite a few.
    His head work is second to none.:cool:
     
    kidcampbell71 likes this.
  8. BigBlockMopar
    Joined: Feb 4, 2006
    Posts: 1,361

    BigBlockMopar
    Member

  9. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Hey, just an update for you guys. Just in case you guys like PAW as your Hemi parts source, they FINALLY got an on-line catalog. Haven't had a chance to look through it yet...

    http://www.earlyhemiengineparts.com/
     
  10. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

  11. Abomination
    Joined: Oct 5, 2006
    Posts: 6,719

    Abomination
    Member

  12. spoons
    Joined: Jan 1, 2004
    Posts: 1,738

    spoons
    Member
    from ohio

    Clay Smith Cams for reground camshafts...
     
  13. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

  14. Shaggy
    Joined: Mar 6, 2003
    Posts: 5,207

    Shaggy
    Member
    from Sultan, WA

    Anouther to add, i have it printed in my archives somewhere, is an artical on machining alum 440 rods to use in a 392, it was on here back in '03 so it could have been in some of the lost forever HAMB though
     
  15. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Shaggy, if you can find it, post it under the "cranks and rods" section for all to see! That would be a good one man!
     
  16. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

  17. 73RR
    Joined: Jan 29, 2007
    Posts: 7,175

    73RR
    Member

    Hi Scooter, Just an update to your list;


    POB 6868, Bend, OR, 97708
    [email protected]

    Thanks


    Gary
     
    Last edited: May 11, 2020
    kidcampbell71 likes this.
  18. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Thanks Gary! The boss still hasn't worked out the "EDIT" key issue so I haven't been able to add it. Sorry about that! As soon as it's fixed I'll get you updated on this thread and the other one as well.
     
  19. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Just adding this website that sells shop manuals. They had every year I threw at them, some of them are priced reasonable, some are pricey, but I'm guessing they should have engine maintenance information in each:

    http://www.autobooksbishko.com/index.html

    Thanks to LisaCarrieAnn who posted the thread with the link.
     
  20. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    New camshaft people added to the list!

    CONTRERAS CAMSHAFTS....
    SHOP phone...909-597-5950
    Chino, California.


    He goes by "Ron In the SHOP" on the HAMB. I'll get more info on address and contact to add to the listing.
     
  21. jsrail
    Joined: Sep 21, 2007
    Posts: 112

    jsrail
    Member

    Scooter, here's another for you to ad. They did the special cam grind on our '56 Dodge 315 Poly cam. Great customer service, they spent 45 minutes on the phone with me to discuss what I was looking for in my cam grind and what suggestions they had for me. They sell and deal in all aspects of valve train components and even some collectible and accessories:

    Schneider Racing Cams
    1235 Cushman Avenue
    San Diego, CA. 92110
    Phone: (619) 297-0227
    Fax: (619) 297-0577
    E-mail: General Sales - [email protected] - Jerry Cantrell

    Special Inquiries - [email protected] - Kevin Cantrell

    Webmaster - [email protected] - Tyler Turnbull
    Spanish Sales - Christian Vasquez
    Website: http://schneidercams.com/

    Jay
     
  22. LSGUN
    Joined: May 26, 2007
    Posts: 1,358

    LSGUN
    Member
    from TX

    Thanks for posting up Jay, I asked in the camshaft and valve train tech section if anyone was running a schneider grind.
     
  23. jsrail
    Joined: Sep 21, 2007
    Posts: 112

    jsrail
    Member

    Lsgun, I posted the specs and such on the cam thread.

    Jay
     
  24. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

  25. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Added another Hemi parts place, thanks to Kerry and a couple other HAMBers that provided the link...

    Rev Engineering. They have a few cast parts as well as an oil pump adapter that seems to be getting good remarks.

    http://hemireveng.net/Default.aspx

    Hope a few people can provide some feedback on their products.
     
  26. eastcoastron
    Joined: Aug 5, 2011
    Posts: 33

    eastcoastron
    Member

    Hi
    I want to post an ad for a swap for a set of 6&3/8" long spark plug tubes for a set of Imperial 5&7/8"or 6" long ones,but can't figure out how to do it.
    Afraid to admit that I am not to good with this sort of thing.
    Thanks,Ron
     
  27. monc440
    Joined: Feb 1, 2011
    Posts: 270

    monc440
    Member


    Ron

    Thats OK we all start someplace. Go to the main page
    (here: http://www.jalopyjournal.com/forum/forumdisplay.php?f=45 then click on parts for sale or wanted. You will be able to list this in parts wanted or parts for sale seeing how you want to trade.
     
  28. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,382

    scootermcrad
    ALLIANCE MEMBER

    Updated a couple numbers and contacts. It's been awhile since I've had any requests for updates or additions.

    If any of you have updates for any of the contacts, or have anyone that can be added for a resource to the list, please send me a PM and I'll add/make changes as needed.

    Thanks!
    S
     
  29. hemiphil
    Joined: May 6, 2010
    Posts: 25

    hemiphil
    Member
    from australia

    try, clipsandfasteners.com for various grade-8 studs, go to sub heading studs, then exhaust and manifold studs, they have double ended studs for rocker covers 5/16 coarse thread at base 5/16 fine thread at top, 3" long that suit the aluminum rocker covers i manufacture, they have quite a few different lengths available, various other diameters as well, cheap too.
     
  30. 402BOSSMAN
    Joined: Jul 26, 2015
    Posts: 427

    402BOSSMAN
    Member

    I'll add my place to the list:

    Smithberg Racing (Contact - Nick Smithberg)
    1901 Clay Street
    Fort Calhoun, Nebraska 68023
    (402) 616-7643
    [email protected]
    www.smithbergracing.com

    Specialize in Cylinder Head CNC Programs & various parts for Dodge, Desoto, & Chrysler Hemis
     
    milwscruffy likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.