Any Anglia cars or projects out there?

My uncle built this 48 back in the 70's out of Fremont CA. Back then it was lower, didn't have the stripping,gray int,wheelie bars or saggy diaper. It was JUS BAD!!!!

 

Yes, you do have to cut the inner structure to get them low down on the boot / trunk lid. I,ve used some 50,s Austin A55 lights, because I had them. Same kinda size as Pontiac ones.






Nice to see some progress.
Oh and Enfo, thanks again man. Just for you......

 

My freinds Thames and my Austin.

 

Nice !

 

Actually on my POP..... I didnt have to cut the inner structure. But only cause my decklid is fiberglass..... When I move the lights to the fenders Im still gonna use the 50 pontiac lights. Im gonna, FRENCH, them into the fender.
Thanks for the pics Rottenpop!!!

 

I've got a 1946 roadster buried in the garage. My dad bought it in the late 1970's, gave it to my wife a couple years ago. Runs/drives/stock. Will post photos next time it is out of garage. Has back seat, according to this a a deluxe? Thanks for posting.

 

Hey Anglia guys!
These aren't mine, I just saw them on the local craigslist.
STEEL and glass rear fenders...

http://minneapolis.craigslist.org/pts/844135752.html

 

Anybody know the dimensions of the window channel fuzzies??? So many sizes want to get it right the first time instead of buying more swapmeet stuffto sell later....

 

My brother's 61 Morris with smallblock and powerglide and after getting thrown off the local NHRA track for wheelbase infraction [only 86 inches] he began to build this 59 Anglia..life got in the way and the anglia went away..still has the 10.32 morris.

 

I should keep this thread up to date. Here's a shot from a few weeks ago:



Nearly finished

 

bet your glad you did'nt sell it jon.

 

Secretly

 

here's one I took in on a trade.

1939fiat (rick)

 

OK, I'll add mine in here, too...... Hope the pics come through.

Kevin in Seattle

 

I've got a couple of the little cars as well.

1955 Pop Ute


1951 Anglia


59 THAMES (SOLD- wish now I kept it)

 

Hi all, my effort; (click on thumbs for bigger pics).

 

Heres a shot of mine if it loads.
Scott in KY

 

its pronounced tems not theymes after the river thames

 

Hello John,Sweet Austin.Ive been looking for a Austin 2 dr Dorset myself,do you know where I can get one?Where exactly in Ohio are you?Im in Cleveland.Are you building your own chassis?If your close enough to me Id sure like to see your Austin live.I have a 48 Austin panel van Im trying to finish.Lets talk.Thanks

 

ronin, sent you a pm

 

Here are pics of my 57 Thames coming apart in my garage. Fabbed rear rails, S10 front stub, SBC motor/trans - TBD. Since I couldn't sell it, I figured I would make a small economical rod out of it. Looking for a parts source if anyone knows of one.

 

Here is another early Anglia. Not mine but was at the Eddyville Nostalgia Drags this summer - all stock. It ran about 19-20 seconds in the 1/8 mile.

 

Rottenpop , your car is also being discussed on ozrodder too !

 

http://anglia-brokers.com/

CC

 

Thanks !

 

http://angliaobsolete.com/

 

and this one will be a pickup

 

toilet roll

 

Very nice, hershambob ! Any build pictures of the green one ?

 

dirty2 sorry no more pics as its not mine,