Register now to get rid of these ads!

Technical Gassers

Discussion in 'The Hokey Ass Message Board' started by Boneyard51, Mar 4, 2022.

  1. I have one of these bullet nose cars in the project row. It would be a poser if I build it. Years ago I was at a billetless show and they let anyone with a car registered to run down the 1/8 mile at Milan Michigan. That is worthy of a spot on my bucket list. This image from speedhunters is the inspiration. Sponsored by Dale’s Happy Hour- those were the days! 2EB77957-D3C3-4B12-84DE-328D3D0FCD6C.jpeg
     
  2. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  3. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  4. John always had top notch drag cars. Note the angle on the coil over front shocks in this photo.
     
    Boneyard51, Sky Six, slayer and 2 others like this.
  5. Marty Strode
    Joined: Apr 28, 2011
    Posts: 8,890

    Marty Strode
    Member

    Ronnie Scrima (Exhibition Engineering) chassis.
     
  6. Charlie Hill. Filthy 40. Pork Zartman driver. 1 Charlie 4.jpg
     
  7. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  8. Butch M
    Joined: Oct 14, 2008
    Posts: 1,633

    Butch M
    Member

    cool stuff
     
    Boneyard51 likes this.
  9. 57Fury440
    Joined: Nov 2, 2020
    Posts: 265

    57Fury440
    Member

    The car in my avatar has a straight axle since the sixties. It is not the axle that will cause any problems but how well it is installed. Like said above most of the cars I raced in gas classes did not have straight axles on them. If you go back to the early to mid-sixties, most gassers specially in the lower classes were driven to the track.
     
  10. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  11. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  12. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  13. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

  14. 6sally6
    Joined: Feb 16, 2014
    Posts: 2,467

    6sally6
    Member

  15. 6sally6
    Joined: Feb 16, 2014
    Posts: 2,467

    6sally6
    Member

     
  16. Sky Six
    Joined: Mar 15, 2018
    Posts: 9,511

    Sky Six
    Member
    from Arizona

    I posted this two pictures ago !
     
    chryslerfan55 and Deuces like this.
  17. Hey bones, I'm just a fan of a straight axle car. I like the look better than a lowered car myself, plus I don't need a jack to get under my car lol. I wanna add that I believe that the old saying "drives like a Gasser" doesn't apply to every car that has a straight axle. Proper geometry fixes that problem. The last 2 I've built drove wonderful. My current car cruises down the highway like a dream. She's a little temperamental in curves, but that's the big and little setup, not like I'm trying to slalom the dang thing anyway lol. But as far as the gasser look, it's my favorite.
     
  18. seb fontana
    Joined: Sep 1, 2005
    Posts: 8,486

    seb fontana
    Member
    from ct

    More travel with a short shock but healthy spring needed.
     
    Boneyard51 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.