Register now to get rid of these ads!

Hot Rods Saving another 32 Ford three window

Discussion in 'The Hokey Ass Message Board' started by Mo rust, Mar 27, 2020.

  1. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    In November I bought a coupe body that had been abused over the years and had some poor attempts to repair the damage. I’ve since had a friend cut the top and cowl loose and start fitting everything back together right. I’ve got a frame ready for it once it’s roughed in and ready for body work. IMG_1855.JPG IMG_1848.JPG IMG_1997.JPG IMG_2216.JPG IMG_2192.JPG IMG_2203.JPG


    Sent from my iPhone using H.A.M.B.
     
  2. CAL
    Joined: May 5, 2005
    Posts: 396

    CAL
    Member
    from Neosho Mo.

    Is that Bill Daniel’s old “32?
     
  3. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    I bought it out of Iowa and I found a listing where it was for sale in Kansas in 2017 but that’s all I know about it so far


    Sent from my iPhone using H.A.M.B.
     
    kidcampbell71 and dana barlow like this.
  4. brady1929
    Joined: Sep 30, 2006
    Posts: 9,254

    brady1929
    Member

    Awesome 32 3w.
     

  5. The37Kid
    Joined: Apr 30, 2004
    Posts: 30,629

    The37Kid
    Member

    Good luck with the rebuild, I'll be following your progress. Bob
     
  6. CC-Mo
    Joined: Oct 13, 2019
    Posts: 70

    CC-Mo

    Yes that'd be a worthwhile project!
    Subscribed.
     
  7. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    IMG_2509.JPG IMG_2505.JPG IMG_2501.JPG

    It’s coming along pretty well. I’m wondering if I should have chopped it more but the windshield I chopped and chromed is 2 1/2” so I’m committed at this point I need to put fenders on my other 32 and move it out of the way so I can put the chassis together for this new coupe


    Sent from my iPhone using H.A.M.B.
     
  8. T&A Flathead
    Joined: Apr 28, 2007
    Posts: 1,985

    T&A Flathead
    Member

    Nice save in progress!
     
  9. I think you chopped it just the right amount.
     
  10. oldtom69
    Joined: Dec 6, 2009
    Posts: 583

    oldtom69
    Member
    from grandin nd

    NO!!!!!!not fenders on the black coupe!!!!
     
    chryslerfan55 likes this.
  11. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    It’s one step closer to being on wheels. The top is filled and I’m working of getting the chassis ready for it
    IMG_2660.JPG IMG_2661.JPG IMG_2655.JPG


    Sent from my iPhone using H.A.M.B.
     
  12. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    charleyw, Gasser 57, Stogy and 4 others like this.
  13. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    I have my latest 32 on it's new chassis and ready to put together a louvered deck lid for it. 32coupe.jpg
     
  14. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    I had a new model A deck lid that I had louvers stamped in that we decided to trim the edges off and make it fit to the 32 deck lid liner on this coupe. We were pleasantly surprised how good it fit.
    C1.jpg c2.jpg c3.jpg c4.jpg c5.jpg
     
    kidcampbell71 likes this.
  15. Mo rust
    Joined: Mar 11, 2012
    Posts: 827

    Mo rust
    Member

    Now I'm tempted to put a satin clear coat on it and run it that way for the first year. I'm also planning on cutting off the rear frame horns and put a tank in the trunk.
     
    kidcampbell71 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.