Kit was delivered today, already did the secondaries. Sent from my iPhone using The H.A.M.B. mobile app
Your fuel inlets look like they are coming out the back , have you tried them on the intake to check interference with the fitting and the next carb?
I did, I have 90 deg. fittings and there’s good clearance. These are going on a J2 manifold and Im trying to get as close to factory as I can. Sent from my iPhone using The H.A.M.B. mobile app
Interesting. If those carbs were on a Chevy 348 the float bowls would face forward. If so, the ‘front’ fuel inlet would be consistent with the 1958 models. They came out the side after that. Help me learn here - are yours installed correctly, or backwards?
The float bowls should be towards the front. Otherwise the fuel splashes away from the Jets when accelerating.
I realized that after I posted the pics, I had a duh moment lol Sent from my iPhone using The H.A.M.B. mobile app
I have the primary torn apart at the moment, I just threw that on the manifold for the pic. Sent from my iPhone using The H.A.M.B. mobile app
Here’s a pic from my 57 Pontiac. It also has 90 degree fittings. It may help. Sent from my iPhone using The H.A.M.B. mobile app
Got the primary finished. It went from this: To this: Sent from my iPhone using The H.A.M.B. mobile app