Hi there. I purchased a vs57 McCulloch supercharger a while ago for my y block and I’m just getting around to the point I’ll be restoring it and fitting it to the motor... I’ve been in search of a bracket for my y block and have yet to locate one in good condition for a reasonable price(I might just make one). I figured I would sell the bracket I have currently but I can’t seem to figure out what it goes to and this is where you guys (hopefully) come in. Can you tell me what this bracket is?!
They made at least a couple y block brackets that I've seen. This is the low driver side mount for a Thunderbird. I used it to reverse engineer a pass side bracket that also mounted an alternator. Loosely based on the F code set up. over at y blocks forever a guy named MoonShadow has this in his photos. He could probably tell you what you've got. If you don't have a list of the guys that rebuild those (often modified for more boost and reliability) check the Studebaker sites or pm me. sorry about the double pic post.
Still looking for a bracket? I have one, and pulley that bolts to harmonic balancer. I’m in Australia, Will quote happily post Sent from my iPhone using Tapatalk
Twisted_Fate, I have that exact bracket. Its for a 1950 to 1956 Oldsmobile. It has the funky line across the front too. From the top, it should have 3 bolt holes to bolt to the top of the intake.