Hot Rods Spark Plug Wire Crimp Tool ?

I need to buy one for 8MM wires.
Any recommendations that don't break the bank?

Thanks

 

I have a MSD tool that works well.

 

You should've gotten 7mm wires.....The tools are way cheaper!

 

Here is one I've used. I buy wires with the spark plugs ends installed, use this tool to crimp the distributor clips.

https://www.summitracing.com/parts/...MIiJu7x_in6AIVDv5kCh1yjwK_EAAYASAAEgLrwPD_BwE

They suggest using a vise but I've had good luck using a Channel Lock right in the engine compartment.

Phil

 

and they look so much better on traditional cars, too

 

It's an OT vehicle.

 

I bought a Pertronics crimp tool set to make plug wires. Works well and use it on all my crimps now...love it.

https://www.speedwaymotors.com/PerT...--ZIFWu5rTwjXjfCJbmq9KghTILMvofBoCehcQAvD_BwE

 

I believe I ordered mine from Summit while trying to get the bill above a hundred bucks to get free shipping.

 

Yep the pertronix tool kit is the very best available !!!! Have used one for a few years .....worth every dime ...

 

I also use the MSD crimping tool, it makes factory like crimps.

 

Used these for years https://www.ebay.com/c/1624643975

 

Me too

 

I’ve worn a few set of those out.
Search up my tech thread trick for getting the boots on.