Projects What are you working on ?

So , we all obviously enjoy this hobby . So what are you currently working on ?

 

Currently I am working on my 1948 Ford F1. Selling my 1927 Model T and concentrate on my oldie .

 

64 C10 and a couple of OTs

Sent from my SM-A102U using Tapatalk

 

Some small patches on the front fenders for my big block powered '59 Chevy 4wd 3600, overhauling the bed is next. I have a pair of rear fenders from a '62, and will be deleting the side-mounted spare. The s55 has it's front and rear glass stainless finally removed, so I can get the pinchwelds cleaned up and a new windshield in it. Winter is finally leaving here in SW Wyoming, so I can get some stuff done here of my own. My buddy has a '48 Plymouth coupe that we will probably get running reliably this weekend, that should be interesting.

 

Theoretically, my 33. But the progress is slow. Work has been crazy, and it makes me lazy. Finishing an engine swap. Once that is done, I will bring my 49 Merc into the shop, which is the one that truly has my interest. Since funds are low, that will mostly consist of setting ride height and attitude. That is one of the most exciting early parts of a build (to me) and it should be obtainable. And it will feed the fire for future progress.

 

I'm working on a bottle of Jameson Black Barrel and my second Guinness tonight this being St. Patty's day and the bars are closed due to some virus or another. Had surgery on my thumb this morning so I can't play in the garage for a bit. But if I could there is a 41 ford truck out there needing some attention. Oh yeah, Vicodin. I should quit typing now.

 

Due to breaking my wrist a week ago I ain't doing shit except hanging around the house and looking over old hot rod books. I am looking forward to Spring Carlisle in a few weeks, if the virus bug doesn't shut it down.

 

A trunk floor on an OT vehicle.... To keep the lights on... We do what, we have ta do...

 

Getting ready to install the wiring on my 28. It's quite a bit further along than this picture. I'll have to take some new ones.

 

Strictly an OT vehicle, refreshing a SBC and swapping in a T56 for my oldest daughter. Once done and in I have to look at doing the rearend of the car. Hoping to have it on the road for her this summer, then going to start getting my '57 Chevy PU ready for the road again, it's been sitting for too damned long.

 

OT sandrail. Single seat, 100", chrome moly frame. 671 blown, aluminum sbc, shortie glide, independent 9" rear and a modified aluminum beam axle. Shooting for less than 1400lbs wet. Should make for an interesting e-ticket ride.

 

Tomorrow it is converting my grandson's old metal bed frame to a welding fabricating table that is more like jail bars laid flat. The son in law did some severe damage to it when he took it apart in a move, grand kid got a new bed and grandpa got a bunch of metal to play with. Hopefully I can lay some pieces out on it for some cutting and welding on a bit table area.

 

Currently completely disassembled for body, paint and final assembly.



-Abone.

 

Changing a head gasket in my '37 Chevy pickup "Deerslayer" . . . Yeah, that's right. Mission creep.

 

1948 Dodge.Did the gas cap and taillight,,trying to fix the -49 Plymouth bumpers.

 

Trying to get this project completely together before my son turns 16 in June and needs something to drive. It has been a fun project with him so far, but we are running out of time.

 

I’m still working on the 42 Chevy coupe that’s my daughters car. I have a lot done, but much more to finish it. I need to start hitting it hard again.

 

1959 TR3A, 1954 3600, 1962 Biscayne, 1962 BelAir and a 1967 Galaxie

 

Working on this 56 F100

 

Doing a complete mechanical overhaul/drivetrain and suspension swap in my 61 Olds Super 88.

 

Fixing Ted's "little accident". Hoping I can match the paint.

 

I am liking the grill/headlight treatment.

 

Well I currently have an old dragster in the garage. Its actually for sale because what I am workin on more then anything else is stayin alive. LOL

No one really wants it so I suppose I am workin on my old dragster.

 

A V8 A , I bought the body at an auction 20 years ago and started on it then shoved it aside and just got back on it about 1 1/2 years ago. Decided I needed to finish it since I had too much in it to sell it as a project, runs and drives but still not completely together.

 

O/T 70 AAR Cuda.

 

Currently working on a little 2door sedan that i picked up recently


Sent from my iPhone using H.A.M.B.

 

THIS THING



Specifically, the floors, body attachment to the subframe, and mounting the seats.

 

putting a rear end in my new project.

 

Replacing Floors and rockers in my 50 Plymouth Suburban