Register now to get rid of these ads!

Hot Rods The ALTERED thread

Discussion in 'The Hokey Ass Message Board' started by loudbang, Mar 3, 2016.

  1. Offset
    Joined: Nov 9, 2010
    Posts: 1,873

    Offset
    Member
    from Canada

  2. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

    Pure Hell Hemi powered

    pure hell hemi.jpg
     
  3. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

    Magic Muffler (bigger better shot)

    magic muffler xxx.JPG
     
  4. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member


    Today from Pat https://patganahl.com/2020/03/02/feature-story/

    This is another one I never saw run, but knew well from the magazines. Finished in white with gold leaf and named the Tazmanian Devil out of Oceanside, NY, this 1830-lb. AA/A on a Chassis Research frame was credited with 9.63/159.86 times from its 6-71 blown 454-inch ’92 Chrysler. Hmm. Minus the blower and several cubic inches, this one’s a lot like my old Low Buck car…’cept mine was faster (am I allowed to brag, a little?).
     
  5. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  6. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  7. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

    posted by rudestude in the 60's thread

    rudestude 60s thread.jpeg
     
  8. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  9. Mike VV
    Joined: Sep 28, 2010
    Posts: 3,038

    Mike VV
    Member
    from SoCal

    That little squiggle at the back of the front fender looks like a good layout for a "slot car" track..!

    [​IMG]

    Mike
     
    chryslerfan55 and Ron Funkhouser like this.
  10. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  11. rooman
    Joined: Sep 20, 2006
    Posts: 4,045

    rooman
    Member

    This is either Mile Hall or Freddie Whittle in England. Mike later ran a front motor dragster using the same name and later (1990) Whittle revived the name on an altered--still a Bantam but not sure if it was the same chassis.
     
  12. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  13. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  14. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  15. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  16. rooman
    Joined: Sep 20, 2006
    Posts: 4,045

    rooman
    Member

    Rob Fitzpartick with slant six Mopar power at Castlereagh International Dragway (or maybe Sydney International at the time)--same strip, just a few different names. The D/A class was for cars with pre 1963 six cylinder, straight eight or flathead power plants. There was a dragster class with the same criteria, both aimed at the budget racer.

    Roo
     
  17. Junior Stock
    Joined: Aug 24, 2004
    Posts: 1,896

    Junior Stock

    and street tires part of budget racer idea? I can see where that would limit what you would need to do horsepower wise.
     
    stillrunners, loudbang and HunterYJ like this.
  18. rooman
    Joined: Sep 20, 2006
    Posts: 4,045

    rooman
    Member

    Those were most likely Goodyear road race tires. At that time in Australia real drag slicks were a little hard to obtain so (especially in the lower classes) most cars ran the readily available road race units. The first dragster that I drove (also a D class car) had Dunlop "green spot" treaded tires as they were meant for wet tracks and had a much softer rubber compound.
    img442.jpg
    Roo
     
  19. THE FRENCHTOWN FLYER
    Joined: Jun 6, 2007
    Posts: 5,401

    THE FRENCHTOWN FLYER
    Member
    from FRENCHTOWN

    Rooman, That is a nice dragster. Is that inline a Holden or?

    Ironically, I am finding that with today's ultra sticky track prep it is actually possible to have too much traction available for smaller engines. I am in in the process of switching from 12 x 31.5 slicks down to 10.5 x 29 stiff side-walled slicks for the upcoming season.

    Everything old is new again.
     
  20. flatheadgary
    Joined: Jul 17, 2007
    Posts: 1,013

    flatheadgary
    Member
    from boron,ca

    now that's the kind of class' i can look at all night. bring on more pics of budget racers rides. those are the kind of cars most people can afford, not so much fuel altereds. nice to watch but it's more fun to drive down the track. i really like to see the cars of Australia. reminds me of American tracks back in the day when ingenuity was more common.
     
    mad mikey, Offset and loudbang like this.
  21. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  22. rooman
    Joined: Sep 20, 2006
    Posts: 4,045

    rooman
    Member

    Actually it is an English Ford Zephyr--171 cubic inches

    Roo
     
  23. THE FRENCHTOWN FLYER
    Joined: Jun 6, 2007
    Posts: 5,401

    THE FRENCHTOWN FLYER
    Member
    from FRENCHTOWN

    High on the FUN/CI basis.
     
    chryslerfan55, mad mikey and loudbang like this.
  24. loudbang
    Joined: Jul 23, 2013
    Posts: 40,291

    loudbang
    Member

  25. Motor_Psycho
    Joined: Jan 21, 2008
    Posts: 81

    Motor_Psycho
    Member

    It's Mike Hall, 2nd version of the Shutdown altered using an ex Dennis Priddle chassis.
     
    chryslerfan55, rooman, Stogy and 2 others like this.
  26. Triple :cool: SU,s. Love it.
     
    chryslerfan55 and loudbang like this.
  27. Offset
    Joined: Nov 9, 2010
    Posts: 1,873

    Offset
    Member
    from Canada

    Round and round she goes where she stops nobody knows...

    temp1_10869f5114c0fc88265a16d210a20a0b8de7dc56.jpg
     
  28. THE FRENCHTOWN FLYER
    Joined: Jun 6, 2007
    Posts: 5,401

    THE FRENCHTOWN FLYER
    Member
    from FRENCHTOWN

    BTDT. Got the photos. I hope he kept it upright.

    Reminds me of the quote, "RACECAR" backwards is RACECAR.
    RACECAR upside down is expensive!
     
  29. GearheadsQCE
    Joined: Mar 23, 2011
    Posts: 3,399

    GearheadsQCE
    Alliance Vendor

    I thought maybe he was celebrating. Looks like he just ran a 0.99!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.