Register now to get rid of these ads!

Projects My Av8 Roadster Build

Discussion in 'Traditional Hot Rods' started by lodaddyo, Sep 17, 2016.

  1. Sounds great!!
     
    lodaddyo likes this.
  2. Aaron D.
    Joined: Oct 27, 2015
    Posts: 1,037

    Aaron D.
    Member

    Nice low tone, love it! Sounds like it wakes right up when you throttled it too:)
     
    lodaddyo likes this.
  3. Mart
    Joined: Mar 3, 2001
    Posts: 4,900

    Mart
    Member

    Sounds crisp. Helpful hint: If you want to do any more videos, use your phone sideways. it fits Youtube's 16:9 format and will appear twice as big.
    Mart.
     
  4. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Thanks Aaron, it took me about 3 hours to get it To run, i had a revpol mallory for a chevy that was machined to fit a flathead, it has the tach drive on it and my tach is an old mechanical stewart warner. I couldnt get it to run with it. It was would back fire, i checked the timing about 5 times. Re stabbed the distributor, checked compression, plugs. Everything. I gave up on it, pulled another mallory distributor i had, installed it and it fired right up . I dont know if that revpol distributor might require dual coils or a special coil. Ill have to do some more research. Im just glad it runs!
     
    1947knuck, brEad, Stogy and 2 others like this.
  5. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Just about got this motor dialed in. Tweaked the timing a little. Only have a few loose ends to tie up and she will be ready for the road. Got my wiring finished up, all my lights work.. Started working on my exhaust. Im using a 1936 driveshaft cut in half. I have the drivers side done. Just need to finish up the passenger side and paint them. I did a quickie front end alignment and set the toe. I ended up swapping my quickchange gears up and now running a 3.85 ratio for now. I have gears to go from a 3.00 up to a 4.25. 3.00 should be a good gear for that long trip to Austin in april.

    Good oil pressure
    CD9DBA8B-E219-479A-83F8-461BAF024A01.jpeg
    57494466-425F-484C-9DB1-1B1FE5F696A3.jpeg
    6DBA157E-E959-4219-8879-85E3CFE066A3.jpeg
    3855E1D8-F164-4DCF-83C5-60123DEB66FF.jpeg
    344452D3-849A-46BD-A806-C9C6988BC2EE.jpeg
    C218C7F7-19F9-4479-9973-5B41368BBDE3.jpeg
     

    Attached Files:

  6. greaser
    Joined: Apr 30, 2006
    Posts: 866

    greaser
    Member

    Sounds awesome. Love that lope!
     
    lodaddyo likes this.
  7. Aaron D.
    Joined: Oct 27, 2015
    Posts: 1,037

    Aaron D.
    Member

    Really nice. It's all coming together now, before ya know it you'll be on the road with a big smile on your face.:cool:
     
  8. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Yeah man, i cant wait!
     
  9. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Well just about done, still need to get the interior panels done and get a top made. But other than that its done. Thanks for watching!
    DC7EA0C4-4A34-4ECB-AD91-4E3A3D6D436E.jpeg 13231849-D8A1-4174-AB54-03BDF8C52EA4.jpeg F1C1369B-4E19-4393-B81E-397CDACCB0DC.jpeg
     
  10. 51box
    Joined: Aug 31, 2005
    Posts: 1,099

    51box
    Member
    from MA

    Looks really good man congrats, it’s not easy to take one all the way to this point. Enjoy it
     
    Jeff34, OFT, lodaddyo and 1 other person like this.
  11. 1-SHOT
    Joined: Sep 23, 2014
    Posts: 2,698

    1-SHOT
    Member
    from Denton

    Perfect, Congratulation on finishing it. Thanks for shareing. Frank
     
  12. Stogy
    Joined: Feb 10, 2007
    Posts: 26,348

    Stogy
    ALLIANCE MEMBER

    @lodaddyo...High Praise...Just Stunning... Please keep on sharing the journey...
     
    lodaddyo and brady1929 like this.
  13. Aaron D.
    Joined: Oct 27, 2015
    Posts: 1,037

    Aaron D.
    Member

    What a beauty, we wanna see a video of it driving (with your smiling face, haha).
     
    lodaddyo and Stogy like this.
  14. sloppy jalopies
    Joined: Jun 29, 2015
    Posts: 5,256

    sloppy jalopies
    Member

    congrats lodaddyo,
    new member of the family has arrived.
     
    lodaddyo likes this.
  15. Excellent build thread and a great result, car looks fantastic.
     
    barrnone50, lodaddyo and brady1929 like this.
  16. louisb
    Joined: Oct 13, 2008
    Posts: 1,126

    louisb
    Member

    Looks great! Congrats on getting it done!

    —louis
     
    barrnone50 and lodaddyo like this.
  17. x77matt
    Joined: Mar 2, 2004
    Posts: 812

    x77matt
    ALLIANCE MEMBER

    Wow! Spectacular Job on this one!
     
    lodaddyo, brady1929 and 48fordnut like this.
  18. brady1929
    Joined: Sep 30, 2006
    Posts: 9,270

    brady1929
    Member

    You must be very proud. It looks like a really cool hot rod.
     
    barrnone50, lodaddyo and 48fordnut like this.
  19. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Thanks everyone, this journey took me a lot longer than I expected but i guess thats how it goes sometimes. Glad i stuck it out, and thanks you guys for keeping me motivated. Ill try to get some running and driving video this week. Oh and the car is registered for the 2020 Lonestar Roundup. See ya there
     
  20. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Now lets get yours done!
     
    redoxide, Stogy and louisb like this.
  21. sloppy jalopies
    Joined: Jun 29, 2015
    Posts: 5,256

    sloppy jalopies
    Member

    Mikie likes it …
    But the couple days of drive time does kinda hurt...
    as we are getting 8" to 10" of winter's white blanket...
     
    OFT, barrnone50, Stogy and 1 other person like this.
  22. IMG_4898.JPG

    I recommend an underdash parcel tray for things like a drink bottle, keys, sunglasses, sunscreen etc puts all your stuff out of site when parked up too.


    Sent from my iPhone using H.A.M.B.
     
  23. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member

    Little video i put together. Im not a filmmaker Lol
     
  24. lodaddyo likes this.
  25. Beautiful!!! Congratulations!!!
     
    lodaddyo likes this.
  26. 48fordnut
    Joined: Nov 4, 2005
    Posts: 4,215

    48fordnut
    Member Emeritus

    Awesome work. Imagination. Keep it up.
     
    lodaddyo likes this.
  27. Aaron D.
    Joined: Oct 27, 2015
    Posts: 1,037

    Aaron D.
    Member

    That car is so freakin bad ass!!! The Flatty sounds mean and nasty, stance, color, wheels, it's all perfect. Time to enjoy your labor now! Great job man.
     
    greaser, lodaddyo and barrnone50 like this.
  28. barrnone50
    Joined: Oct 24, 2010
    Posts: 571

    barrnone50
    Member
    from texas

    Chain up Brother I feel your Pain!!
     
    Stogy likes this.
  29. lodaddyo
    Joined: May 5, 2002
    Posts: 1,250

    lodaddyo
    Member


    Thanks everyone. Its been a fun one!
     
    1947knuck and Stogy like this.
  30. Mart
    Joined: Mar 3, 2001
    Posts: 4,900

    Mart
    Member

    Cool car. Cool video. Well done all round.

    The video is pretty good actually.

    Mart.
     
    lodaddyo likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.