Register now to get rid of these ads!

Features T roadster gow jobs.

Discussion in 'Traditional Hot Rods' started by David Mazza, Sep 19, 2019.

  1. Is that a Frontenac head on the full fendered T?
     
  2. Mr48chev
    Joined: Dec 28, 2007
    Posts: 33,861

    Mr48chev
    ALLIANCE MEMBER

    Wow what a great thread. I think I know what might happen with the front half of a 27 Touring I have had for around 35 years now.
     
    Lil'Alb likes this.
  3. guitarguy
    Joined: May 26, 2008
    Posts: 650

    guitarguy
    Member

    Yes, yes it is. Steve Lang said it was reported to them it had been at I believe he said 89mph. As an owner of a stock T, I find that terrifying. However there were all sorts of little tricks all over the thing.

    Seeing the Aldrich car was an AMAZING experience, even though it needs to be put back together. The amount of history behind the car is unreal. I wish we had better access to it as it was kinda in a corner with a bunch of stuff all around it.
     
    Outback and The37Kid like this.
  4. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,694

    Bigcheese327
    Member

    It's a Fronty Model T (for Touring) head. Read all about it here. The car ran 87 mph at a dry lake in 1940 with the top down but the fenders still installed.
     
    Outback, The37Kid and kidcampbell71 like this.
  5. Gow with flathead v8 and Carson top
    [​IMG]
     
    a boner, exterminator, Jet96 and 2 others like this.
  6. guitarguy
    Joined: May 26, 2008
    Posts: 650

    guitarguy
    Member

    I respectfully disagree. No V-8's
     
    barrnone50, Bigcheese327 and The37Kid like this.
  7. I know, I'll Gow my way, You Gow yours It's a same period car that probably got updated from 4 Cyl. to V8
     
    kidcampbell71 and The37Kid like this.
  8. The37Kid
    Joined: Apr 30, 2004
    Posts: 30,628

    The37Kid
    Member

    That's a good reply, has anyone sat down and come up with the features that make a "correct" Gow Job? When was the first and last period built car? Bob
     
    Outback likes this.
  9. guitarguy
    Joined: May 26, 2008
    Posts: 650

    guitarguy
    Member

    I don't think you can nail it down to a specific time frame. Look at the Aldrich car at the '49 Salt Flats. That's way later than the period were generally speaking of (approx early thirties, and earlier). I am by no means an expert or claim to be though. But the minute a V-8 goes in, I'm going to split hairs and terminology and claim it's a bona fide Hot Rod.

    Upgrades(Major) are one thing, retaining most of it's heritage with subtle upgrades is another. It's like taking a traditional '33 Coupe and giving it to Kindig. It's not the same. Heck, look at the Kookie Car with it's as found so called upgrades from its original Grabowski build. It's just not the same.

    Again, strictly my opinion, so others like Mr. Williamson don't have to taunt me with Private Messages.

    Have a great day.

    Sent from my thinks it's smarter than me smart phone using The H.A.M.B. mobile app
     
    Outback and Bigcheese327 like this.
  10. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,694

    Bigcheese327
    Member

    I agree with @guitarguy

    Gow was a term that generally meant "hot rod" in the pre-war era, but most people today are using it to cover cars built in the early '30s style with tall-and-skinny wheels and four-cylinder engines. That's what @David Mazza meant when he started this thread and there are plenty of other places to show off late-'30s style hot irons with 16-inch wheels, V-8's and the like.
     
  11. Chad, I was trying to bond a bit with my Johnny Smith guitar question in the private message, in no way was I "Taunting" you, things are "Cool" at my end, hope they are with you too. John Williamson
     
    Outback and Bigcheese327 like this.
  12. guitarguy
    Joined: May 26, 2008
    Posts: 650

    guitarguy
    Member

    Bob, I Think (believe) also the features just like the use of the term Gow are very subjective. I think alot of terms get thrown around nowadays a little too liberally. Example, you don't paint your ride with shiny paint, most general John Q Public will walk up and go "hey, nice Rat Rod"....as you cringe trying to restrain yourself from stampeding them.

    We had a pretty good conversation about these types of builds on the trip back from Lang's. If you look at what really seems to fit the terminology via old pictures....again to me, I think (believe) they contain the following:

    They are usually open cars (Tourings, cut off tourings, roadsters of 1930 or earlier)
    Typically no fenders / running boards (Sorry Bigcheese)
    They typically have their stock engine, but often hopped up.
    To go along with that, usually is a 4 cyl or possibly 6 cyl depending on make.
    Typically contain wheels of 18" or larger
    Stock(ish) rear axles
    Stock suspensions, but often interchanged parts in this area usually for improvement.
    Often lowered via various methods.
    Often not very flashy looking, just stripped down and basic.

    Im open to suggestions to the list. David and I have agreed our builds have some borderline features, but they are more Gow than not. I also believe Gows bridge the gap between old Speedsters and newer Hot Rods.

    To me, two very well known and Iconic cars that meet my criteria, The Multi Aldrich roadster and Clayton Paddison's roadster.
     
    Last edited: Nov 7, 2019
  13. Paul
    Joined: Aug 29, 2002
    Posts: 16,387

    Paul
    Editor

    Sounds like if there were a cut off date it'd be 1931.
     
  14. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,694

    Bigcheese327
    Member

    Hey man, apologize to Gabby Garrison and Bob Wilcox, not me! ;)

    More like 1934, though certainly plenty of examples were found past that date (see the $25 car earlier). It's just like you still see Pro Street '80s cars around, though few are building them at this point.
     
  15. Blackbob
    Joined: Nov 19, 2008
    Posts: 177

    Blackbob
    Member

    My 26T "Gin Runner" finally got it running after too long in storage. Ive got a 2 speed Ruckstell to fit and a full set of 21" wires and road tyres to go on. the dirt bike tyres are for playing about on the farm!
    Motor is stock '26 T with A manifolds and a 1.25" SU carb, Texas T dizzy and ally pistons. Plan is to continue to refine and hop up but keep it pre 1930 in looks and main components. Im looking for a brass bodied SU of the same size to replace the 1960's one I'm using just now.
     

    Attached Files:

    Hugh Jones, 29EHV8, bct and 6 others like this.
  16. David Mazza
    Joined: Aug 25, 2018
    Posts: 87

    David Mazza

    8565F7D4-4A59-4875-B90A-1DFEBDBD412A.jpeg 232D8C0E-F119-4769-9AFB-C3336A262F62.jpeg A beautiful day here in the Berkshires. Guitar guy got stuff done on his and so did I! Got turtle deck off and started taking the rest apart but ran into a snag. Someone in the past welded the panels together in fairly hidden places. So taking this tub apart will take time and patience. Also requiring loud power tools to grind welds limits work so I dont wake the napping toddler! Also started getting rear axle housings ready for blast and a bath. Had to grind rivets to remove the backing plates.
     
    S1B, kidcampbell71, bct and 6 others like this.
  17. Lil'Alb
    Joined: Sep 22, 2013
    Posts: 255

    Lil'Alb
    Member
    from brier, wa

    This one appears to have an octa gain water injection unit installed?
     
  18. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,694

    Bigcheese327
    Member

    Can you point out where you are seeing that? Looking closely at the photo, I see a cylinder above the head that I don't recognize, but I kinda took it to be an AC-style air cleaner unit on a down-draft carburetor.
     
  19. ghalperin
    Joined: Dec 10, 2012
    Posts: 212

    ghalperin
    Member

    4 to GOW, 8 to PLOW
     
    Bigcheese327 and barrnone50 like this.
  20. David Mazza
    Joined: Aug 25, 2018
    Posts: 87

    David Mazza

    EE4C98C4-5CE4-4856-B0B0-560DDD248755.jpeg 169EFB4E-7CBD-4DB3-BFCF-21753E270148.jpeg B0CAC271-AC26-471B-B8F0-8B5A332D9BB7.jpeg Wish I could say I have gotten stuff done but I am in a funky tired procrastination mood. But I did run across one I haven’t posted so here’s one more gow not seen on this thread yet!
     
    Lil'Alb, S1B, exterminator and 13 others like this.
  21. The37Kid
    Joined: Apr 30, 2004
    Posts: 30,628

    The37Kid
    Member

    43328874604_d068972b5f_b.jpg Fancy, found it on the web somewere. Bob
     
  22. tjm73
    Joined: Feb 17, 2006
    Posts: 3,484

    tjm73
    Member

    The37Kid likes this.
  23. studebakerjoe
    Joined: Jul 7, 2015
    Posts: 1,136

    studebakerjoe
    Member

    Thats Bob Estes car.
     
    RileyRacing likes this.
  24. The37Kid
    Joined: Apr 30, 2004
    Posts: 30,628

    The37Kid
    Member

    ^^^^^ Thanks studebakerjoe, is that T still around? Bob
     
  25. studebakerjoe
    Joined: Jul 7, 2015
    Posts: 1,136

    studebakerjoe
    Member

    Bob, don't know if it is. I believe Estes pulled the engine at some point and put it in a race car. If I recall correctly it had an SR Fronty head on it.
     
  26. DDDenny
    Joined: Feb 6, 2015
    Posts: 19,139

    DDDenny
    Member
    from oregon

    David, was that at Lindseys farm cruise in Shedd?
    Looks like the T that I saw at Pauls get together at his place near Woodburn, if it is he had an old motorcycle displayed in the bed, a very cool car.
     
    Outback likes this.
  27. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,694

    Bigcheese327
    Member

    The story goes, as related by Dean Batchelor, that Estes was arrested and the judge ordered the car sold.

    It's probably in a deep basement someplace in LA. Clark Gable's long-forgotten secret underground garage.
     
    The37Kid, guitarguy and kidcampbell71 like this.
  28. David Mazza
    Joined: Aug 25, 2018
    Posts: 87

    David Mazza

    Turned the giant crate into a thanksgiving table. Thanks because I was able to reuse my lumber and all the screws from the crate! Now to get some main body skills and rear sill from ford wood and start put body back together on my new frame table! Happy thanksgiving everybody!! 914C6E5E-B123-4FCB-9D02-F4F5FC564507.jpeg 5CD203DF-B605-4308-A5F5-91F9201255A0.jpeg
     
  29. The37Kid
    Joined: Apr 30, 2004
    Posts: 30,628

    The37Kid
    Member

    Nice looking frame, if that is freshly blasted get some primer on it. Happy Thanksgiving! Bob
     
    kidcampbell71 likes this.
  30. David Mazza
    Joined: Aug 25, 2018
    Posts: 87

    David Mazza

    B9EE2CD5-BCFD-4D2A-AC0F-4EAE413C1A03.jpeg B1ACF5DA-95F7-4F92-AD46-6086BA81B4D1.jpeg 57FF04EC-5925-49D7-9C43-EEAE0A807796.jpeg 9369A770-3CA3-4FBD-B301-B6D73681E785.jpeg The frame is in primer just for protection right now. Got frame level on stand and securely strapped down. Got the body up on chassis for the first time. This way the whole thing is mobile and I can roll it outside for room when needed this winter. Also now able to look at lower section of body better. It’s gonna need up to four inches replaced in some sections. Hopefully just the lower flange in others. B9EE2CD5-BCFD-4D2A-AC0F-4EAE413C1A03.jpeg B1ACF5DA-95F7-4F92-AD46-6086BA81B4D1.jpeg 57FF04EC-5925-49D7-9C43-EEAE0A807796.jpeg
     
    Last edited: Nov 28, 2019
    alfin32, Outback, Jet96 and 5 others like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.