Hot Rods Your fuel blocks

Let's see your fuel blocks from mild to wild. Vintage to custom made.

 

I made my own ,out of stainless box tubing{3/4in. OD good size for taping for nips} welded ends an polished. Like my home made log 4x2 intake that I used a old drive shaft to cut up an weld together. This photo is fairly new,its after I had replace my brass an copper with alum new rad. But the 5 hook up fuel block can be seen. Back when I made it,I just never like hose's hanging all over the place,but do like seeing fuel flow.

 

Probably should call this a fuel log but it's custom.

 

Mine. Moon unit (alpha) attached to the carb adapter, my lines.

 

What size are those holley's Dana Barlow? CID

 

That's what I am looking for. Fresh looks and ideas Let's see some more.

 

Matched 94s with all PV plugs

 

Generic hex fuel log from the kid's parts pile.

 

Fuel Log.

 

Love that HP Series carb....

 

Love it. A piece of art.

 

Dig the Moon fuel pressure gauge. Hits that hot rod flavor.

 

Built by Braswell.

 

A Rembrandt

 

I built my own 1"x1" aluminum solid that was in the window frame of a Winnebago I was scraping, the aluminum angle came out of the scrap dumpster.

 

Here's mine. Normally attaches to the firewall but the car is all apart. It is a Princess Auto 4-in-1 air manifold#8628745 sold for $19.95 that I shortened by one hole and buffed up.

 

I love the tech and using the old noggin

 

Nice I like the fuel line separater touch.

 

I have an Eddie Meyer fuel block that still needs to be drilled out and threaded. I would like to get find machined completely around the sides. Just got find where I put it

 

Here's mine.

 

Simple is as simple does...

 

It is funny the way you phrased that, because the 1"x1" fell out of the window frame of the camper an hit me in the head.

I held it up and yelled to my dad. At the say time we said fuel log.

 

You were just a few years too late to discover the law of gravity.

 

Found these 2 today cleaning out some cabinets..

 

Nice.

 

A friend has a Fenton. He is tickled to have it.

 

Copper nickel tubing? Very nice.

 

Old finned Moon unit on the 55's tri power

Then a finned Eelco unit on the 6x2's on Taboo