It's a pretty cool looking car with a lot of style but, from the side view there is a obvious hiccup with the suspension location for the rear independent, the protrusion in front of the rear wheel just blurs the smooth lines. Other than that it is a beautiful car. HRP
why would there be pipes going off the headers under the car for mufflers? Awesome hot rod, not being critical, just curious
@sololobo take a look at the picture where they're polishing it. The end of the pipe looks really clean. I'm betting there's some sort of block off that diverts the exhaust down. I'm thinking the tips are purely aesthetic. I'd lose the bobbed fenders, but other than that I like it.
Here's one of my father's pics of Tony Martinez' Hiboy at ANDY'S PICNIC in July of 1969: Tony Martinez' dark blue '29 Roadster on Deuce rails ... featured Corvette IRS and rat motor ... from atop the hill, dad caught three rodders contemplating the 331ci HEMI in our Deuce Coupe: "A Rose Between Two Thorns" The "HEMI32" Coupe flanked by two Chevy-powered Roadsters: Dino @fremont32 Ramacciotti's '32 with a 327ci SBC (R) and the Martinez' '29 with a BBC (L) ... and 40 years later, I shot a pic of the car at the Goodguy's West Coast Nationals in August of 2009:
Andy @AndySS Southard Jr. put Tony's Roadster on the cover of his "HOT RODs & CUSTOMs of the 1960s" book:
↑ Ha, ha I agree and I'm now rethinking what I said about them. The top on it with the fenders makes it downright sinister.
Andy @AndySS Southard Jr. put Tony's Roadster on the cover of his "Street Roadster of the Year " article in the July 1969 issue of HOT ROD Magazine:
Some pics of Tony's Roadster at the 1969 GNRS (aka the Oakland Roadster Show): image by James Handy photographer unknown
I’d say it’s extremely traditional. I think the word traditional seems to get attached to whatever era, period, is currently in vogue. Right now there’s a lot of 40’s style hot rodding going on. Is this car period correct to the 40’s? Fuck no. Is it period correct to the cut off to this website? That’s the line it’s walking, but really only by a year or so with the big block and the Vette rear. I think the year cut off of the HAMB has just as much to do with the style as the year of the car. Anyhow. It’s pretty fucking cool, thanks for sharing it
State of the art mid 60's hot rod that had evolved over a few years as most hot rods did then. Those photos from the July 69 hot rod look real familiar as I studied those for more than a little bit just before I got out of the army and still have that issue somewhere in the stack. Plug inside the end of the pipe because you didn't drive on the streets with open headers then. That's a poser thing that came much later or started as a pro fairgrounds poser thing and expanded into the common use it has now.
The Vette parts were around in 65, but they were a very small part of the hot rodding scene at the time. That stuff was expensive back then, too!
Are those 49/50 Ford tail lights? I like them. Nice change from the 48 chevy, 39 ford, or 50 Pontiac. Neat car, cutting edge once upon a time. The front tires are too wide, but styles do change.
At least they are all same year vette parts so in theory you could get a wrecked vette and party on. Compared to some of these 40’s styled hot rods that have every super rare dodad known to man on it. You would have legitimately had a fuck load of cash in that era to seek out and use all that on the same car. So you could argue that having a vette parts car is more period correct - feasibly actually happened- than the old style builds with rare parts. And yeah I think I like it with the fenders and no hood better. Great photos everybody!
Another pic from page 14 of the November 1969 issue of ROD & Custom: image by Andy @AndySS Southard Jr. entire article - click thumbnail to enlarge
I love the good years! That blue stripe and lettering has always been one of my favorites. I'd have left them on in a heart beat. I also noticed the corvette shifter on the floor. Traditional in my book!
I guess it depends on where one draws the line of what a "traditional hot rod " are? You can alway say that for instance Tom McMullens 32 Roadster is traditional in the sence that it has been around along time and have traditions in the hot rod enviroment. So...both this car and McMullens might be considered "historical hot rods" but "traditional??" Nope. Not in my eyes...and mind. A traditional hot rod is buildt close to the 30s,40s and early 50s style with parts, replicas or originals, from that era. I mean. You have to draw the line somewhere. Whats next? Red 1980s street rods by Boyd becomes traditional hot rods?? Just my opinion and who cares about what I think? But.......in the end its just words.
Maybe we need a new term for cars that maybe fall outside the usual traditional hot rod time from, or don't tick of all the traditional hot rod boxes, but are still worth considering. Maybe take a page from art history, and call it...post traditional?
I'm curious about what 'limit' is being pushed here... The HAMB since I've been here has had more than a bit of a split personality. The '65 cut-off has always struck me as somewhat arbitrary, at least when it comes to Hot Rods. I get it on the customs/Detroit iron side; 'traditional' customs were all but dead by then (Ford's Custom Caravan was gone, and even GM and Mopar cut way back on display of 'concept cars') and Detroit was in full muscle-car fever mode until the party ended in '72 with the arrival of nation-wide smog/safety laws. But on the Hot Rod side, not that much changed... Now the hard-core traditionalists would have you believe that any 'trad' car has to be built with only period parts and in slavish imitation of what came 'commonly' before. Ignoring the fact that imagination and innovation has always been a driving force in the hobby. There's been more than a few bizarre threads on here where period-built cars were declared as 'non-traditional' by some because they didn't look like every other car. Muddying the waters further, the somewhat uneasy acceptance of more modern parts and building methods (OD trans, TIG, air bags to name just a few) has diluted the traditionalist position. Which brings us to the feature car. Built in the pre-billet/catalog parts era, this car was built the old-fashioned way. It's pretty obvious he got access to a totaled 'Vette, donating 'upgrade' parts just like the 'old days'. Being almost entirely home-built is another very traditional mark; anybody who can single-handedly build a car to this level deserves admiration and respect. Other than the then-popular wheels/tires, the build style is entirely traditional; change those and this wouldn't raise any eyebrows pulling into a show. He nailed that timeless look and IMO is a better representation of a Hot Rod than some of the recent 'traditional' AMBR winners.