Register now to get rid of these ads!

Hot Rods gauge panel engine turned

Discussion in 'The Hokey Ass Message Board' started by blalock51, May 22, 2019.

  1. blalock51
    Joined: Oct 15, 2008
    Posts: 69

    blalock51
    Member

    gary here in alvin tx who makes engine turned gauge panels -need for 53 stude champion to install gauges thanks
     
  2. harpo1313
    Joined: Jan 4, 2008
    Posts: 2,584

    harpo1313
    Member
    from wareham,ma


  3. sliceddeuce
    Joined: Aug 15, 2017
    Posts: 2,981

    sliceddeuce
    Member

    I see the welcoming committee have arrived
     
    VANDENPLAS and Bandit Billy like this.
  4. 40LUV
    Joined: Dec 30, 2003
    Posts: 1,883

    40LUV
    Member
    from Mid Jersey

  5. metlmunchr
    Joined: Jan 16, 2010
    Posts: 861

    metlmunchr
    Member

    I think there's a question in there, but its amazing how hard it can be to understand something written with no capitalization or punctuation.
     
    clem, Blues4U and lothiandon1940 like this.
  6. ............It can certainly make all the difference in the intended meaning!!:eek: 1336075413637_9450087.png
     
  7. Smokeybear
    Joined: Apr 20, 2011
    Posts: 325

    Smokeybear
    Member

  8. Bandit Billy
    Joined: Sep 16, 2014
    Posts: 12,287

    Bandit Billy
    ALLIANCE MEMBER

    Here, let me interpret
    It's Gary here in Alvin, TX. Who makes engine turned gauge panels? I need one for a 53 Studebaker Champion so I can install the gauges.
     
  9. 62rebel
    Joined: Sep 1, 2008
    Posts: 3,232

    62rebel
    Member

    yeah, it's not like we're Western Union and charge by the letter. Feel free to use as much wordage as you like.
     
    LAROKE, lothiandon1940 and town sedan like this.
  10. Fortunateson
    Joined: Apr 30, 2012
    Posts: 5,331

    Fortunateson
    Member

    Well I taught English for 11 years and it was perfectly clear to me. However, that would be at the beginning of the year where the students started the learning process!
     
    clem and Bugguts like this.
  11. flamedabone
    Joined: Aug 3, 2001
    Posts: 5,441

    flamedabone
    ALLIANCE MEMBER

    Like this? I did mine with a small piece of scotchbrite on a stick.

    [​IMG]

    Don't look at the off topic gauges....

    -Abone.
     
    LAROKE and osage orange like this.
  12. Get a piece of wooden dowel, chuck it up in your drill press, put some lapping compound on the end of the dowel and go for it.
    Eastwood even has a kit and instructions.
    Part numbers and instruction PDF can be found here
    https://www.eastwood.com/images/pdf/13117-13118Q.pdf
    Chappy
     
    osage orange and loudbang like this.
  13. FPM Metals, 402-729-2264 has pre turned aluminum or stainless sheets or will make a custom panel to your specs.
    May not be inexpensive however. I think they are a HAMB vendor.

    Mick
     
    Stogy and lothiandon1940 like this.
  14. Speed~On
    Joined: Apr 28, 2011
    Posts: 1,607

    Speed~On
    Member

    @blalock51 hello Gary, do you have the dash and just want it engine turned? Or do you need the dash, too?
     
    Stogy likes this.
  15. rudestude
    Joined: Mar 23, 2016
    Posts: 3,048

    rudestude
    Member

    me did have no uh problam readed it Hell it was not that difficult to figure out what he was wanting . It's nice to see some guys can read through it and over look some imperfections to help the guy out, I know it's hard for perfect people to do that .

    Sent from my SM-T387V using The H.A.M.B. mobile app
     
  16. 29moonshine
    Joined: Dec 30, 2006
    Posts: 1,341

    29moonshine
    Member

  17. vtx1800
    Joined: Oct 4, 2009
    Posts: 1,709

    vtx1800
    ALLIANCE MEMBER

    This would solve the problem...and I have an extra Hawk dash:) IMG_2164.JPG
     
    Just Gary and osage orange like this.
  18. blalock51
    Joined: Oct 15, 2008
    Posts: 69

    blalock51
    Member

    thanks for replys even for shit heads
     

    Attached Files:

  19. Shit heads? On the HAMB? Tell me it ain't so!
     
    lothiandon1940 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.