Projects 1933/34 ford roadster project

Build a cart for the rear end, so I can move it around once it’s built. I’m studying up on Vern’s guides for my first QC buildup...waiting on a few parts and consumables.




Sent from my iPad using The H.A.M.B. mobile app

 

I've been getting ready to attempt my first rebuild of a Ford "Banjo" rearend and was trying to come up with a good way to scoot the assembly around in my limited shop space. Your cart idea is perfect. Thanks for sharing that picture.

 

The cart is a $15 Harbor Freight 30 inch furniture dolly


Sent from my iPad using The H.A.M.B. mobile app

 

Your axle housings are on the wrong sides. All else looks good.

 

Thanks...


Sent from my iPad using The H.A.M.B. mobile app

 

I wonder if a low arch spring (instead of a Model A spring) would clear with the spring perches upside down like that?!

3blap.

 

Interesting....

 

Put the rear end together, will still have it apart again after mock up to weld brackets on it.








I got the spring spread with my porta power and had a face palm moment....I ordered a spreader that would fit around the halibrand.


Sent from my iPad using The H.A.M.B. mobile app

 

Worked on suspension components for this project and the three window




Sent from my iPad using The H.A.M.B. mobile app

 

MEN what we have here is a HOARDER a bunch of everything hidden away.

Just kidding

 

To repeat: Very inspiring!

 

Cleaned, installed new
studs and ready for primer and paint




Sent from my iPad using The H.A.M.B. mobile app

 

Got the spring on and brakes and hubs.





Sent from my iPad using The H.A.M.B. mobile app

 

Waiting on new frame rails, did some prep on engine






Sent from my iPad using The H.A.M.B. mobile app

 

Making an A-pillar bracket.





Sent from my iPad using The H.A.M.B. mobile app

 

Very nice fab and resto work on the individual pieces. Is that engine seriously going into one of the cars? Will it fit?

 

It’s going to take some massaging, there is an Australian 3 window with one.


Sent from my iPad using The H.A.M.B. mobile app

 

I'll be watching as this one comes together. That remote shifter mechanism is a neat touch.

 

Do you have any better shots of the shifter because I would like to duplicate it.
Thanks Frank

 

Here is a shot when I did it





Sent from my iPad using The H.A.M.B. mobile app

 

Thanks a lot Frank

 

Holy ¥€$@. You’re putting a V12 FH in the roadster?? That is going to be epic!


Sent from my iPad using H.A.M.B.

 

Awesome work by the way. The woodwork looks great!


Sent from my iPad using H.A.M.B.

 

Thanks, it’s going slowly


Sent from my iPad using The H.A.M.B. mobile app

 

From my vantage point Elvis's on the Hamb Rock......great detail and connection to the time not too long ago @Elvis100 ...

 

AWSOME work from what you started with. AND i'm sitting, wondering if i want to do my 34 rdst. that i'v had for 18 years that was almost rust free body and what little rust has been fixed and i have all the parts...

 

Thanks, collecting the parts has been fun... I’m only missing seats. Right now having some space issues (two bays and three projects)


Sent from my iPad using The H.A.M.B. mobile app

 

This is so clever..kudos on your ingenuity!


Sent from my iPad using The H.A.M.B. mobile app

 

This is so clever...kudos for the ingenuity!


Sent from my iPad using The H.A.M.B. mobile app