Been long time coming car is 1965 Chevy 2 Muncie 4 speed 9.3 olds fully built roller 383 hairpin axle Sent from my Pixel 2 using The H.A.M.B. mobile app
It should be a pretty strong runner 610/610 blower grind 208 valve heads 230cc runners I hope she sees some time on the rear bumper Sent from my Pixel 2 using The H.A.M.B. mobile app
A little more progress my homemade alt bracket couldn't buy what I needed so I made it it's probably not the prettiest but it serves its purpose throttle linkage is complete next is drag links front brakes Sent from my Pixel 2 using The H.A.M.B. mobile app
Made a little more progress tonight got trans I and vertigate installed mocked up core support Sent from my Pixel 2 using The H.A.M.B. mobile app
Engine looks good. Not sure if you have it, but on your alt bracket, it should have a brace on rear to help keep it from flexing. You could use the fuel pump cover bolt holes if not running mech fuel pump. Flexing will potentially cause the mount bolts to develop crack and break
Been a good night one of those when stuff went well even got the steering linkage sorted out Sent from my Pixel 2 using The H.A.M.B. mobile app
Scored some crankcase breathers and found some m/t valve cover I lent to a friend and forgot about Sent from my Pixel 2 using The H.A.M.B. mobile app
And a little more progress homemade clutch linkage mock up not the finished product but close went this route do to hydraulic throw out bearing failure this way don't have to worry about brake fluid on my clutch if something goes awal Sent from my Pixel 2 using The H.A.M.B. mobile app