rack and pinion identifier

need this rack identified off of a 1949 Hudson. Any help appreciated.

Sent from my SM-N950U using Tapatalk

 

Some better pics and more info would help. Like what suspension, measurements that kind of stuff

At first glance it's similar to dodge omni, at least the mounting any way. and quite popular in our hobby

You would get better response on the main board

 

74-78 mustang check weather hose fittings are flare or o-ring, flare is the earlier ones


Sent from my iPhone using H.A.M.B.

 

I may b wrong on that last comment Im sure the m2 rack has a solid p/side mount but someone could have machined it off


Sent from my iPhone using The H.A.M.B. mobile app

 

After a little more research found this part 8011820-01 from Summit or Jegs. I want to know if the tie rods are serviceable or what the rack possibly came off of. This pic shows a Malibu rack beside it. almost a match. tie rods are too long.

Sent from my SM-N950U using Tapatalk

 

No way that's mustang rack . It's backwards and the mounts are wrong.

 

No way is that a match.
Yes tie rods are changeable.
Moog probably has no less than 50 different tie rods that will go on that rack out of 1200 or so part numbers.

 

Here's a dodge omni,
It's close but not


Mustang 2 rack

 

You can match up the tie rods by size in the moog book.
Application is irrelevant then

 

what year was that Dodge omni? Thanks for replies

Sent from my SM-N950U using Tapatalk

 

1984 ish